User manual JAMO IO-A2

[. . . ] Indoor/Outdoor 1A2, 3A2, 3T, 8A2 Congratulations on your purchase of Jamo Indoor/Outdoor speakers. Package content. Speaker (2) Curved bracket "a" (2) Wall bracket "b" (2) Wall bracket cover "c" (2) Thumb screw "k" (4) 1" Allen bolt "d" (4) ½" Allen bolt "e" (4) Allen wrench (1) Port plug "i" (4) Screw plug "g" (8) Manual (1) Assembly of bracket. Place the curved bracket (a) between the wall bracket (b) and wall bracket cover (c) as shown in fig. [. . . ] Remove the grill (h) from the speaker and insert two port plugs (i) into the bass ports. The speaker will reproduce less bass with the ports closed. Connecting speaker wires. Loosen speaker terminals by turning counter clockwise. Strip ½"/12 mm insulation off each wire. Twist strands on each wire to form "solid" wire. Insert one wire into each terminal and tighten terminal by turning clockwise. Make sure positive (+) is to red terminal and negative (-) to black terminal for correct phasing. This model is for 70V or 100V line installation. This is mainly used in commercial installations with many speakers and requires an amplifier with matching transformer outputs. A switch located next to the terminals allows for adjustments of the level of the speaker in 10W, 5W, 2. 5W and 1. 25W settings. Adjust the switch to the desired level on each speaker. Place the speaker inside the curved bracket as shown in fig. 2 and insert thumb screws (k) through each end of the curved bracket into the speaker. Adjust the speaker to the desired angle and tighten the thumb screws. [. . . ] Jamo warranty on all loudspeakers and accessories is seven (7) years. In-wall and in-ceiling loudspeakers carries Limited Lifetime Warranty in the US only. Electronics (receivers, amplifiers, screens, distribution systems, sub-woofer amplifier etc. ) carries a two (2) year warranty. www. jamo. com [. . . ]