User manual JANE KOOS

[. . . ] Make sure that everyone who is ever going to use the platform also knows how to install it and use it correctly. It has been discovered that a significant percentage of car seat users do not install their seats correctly, understanding the instruction manual and following it correctly is as important for safety as the actual seat. Keep the instructions in the compartment on the platform and consult them if in any doubt. Es pictures that show how to install and use all the JANÉ safety products. [. . . ] The KOOS platform is compatible with the ISOfix categories: Classes C, D and E. The anti-rotation leg (2) is very important for safety, adjust it properly so that it is supported by the floor of the vehicle. If the supporting surface for the leg is not the actual vehicle chassis (a storage compartment for example) do not install the platform on this seat. Installing the platform in the vehicle 1a - Place the platform on the vehicle seat with the antirotation leg (2) and the KOOS fastening guard (10) unfolded. 1b - Take the ISOfix fasteners out (3) turning the button (5) on the front of the base. 1c - Guide both fasteners (3) towards the ISOfix axles of your vehicle and press until both sides are locked into place. Two green signals will appear on the release buttons (4) indicating that they are correctly fastened. If one or both indicators are red, try it again. 1d - Adjust the height of the leg (2) so that it is supported by the floor of the vehicle, the indicator on the base of the leg (11) will turn green. Removing the platform 1e - Loosen the platform by turning the handle on the front of the platform (5). 1f - Release the ISOfix fasteners by pulling the buttons (4), the button indicator will turn red. Installing the KOOS baby carrier on the platform 2a - Drop the baby carrier so it locks into place with the ProFix fasteners (9). 2b - Check that both sides are fastened into place, the indicator should be green. 2c - Set the KOOS handle to the auto position, the car symbol should be complete. 2d - Turn the handle (5) so that the whole ensemble is secure against the backrest of the vehicle WARNING Never leave the child alone. Any alteration or addition to the device without due authorisation from JANÉ may seriously alter the safety of the retention system. Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. [. . . ] Notice: For the maximum safety and care of your new JANÉ product, it is very important that you complete the registration card found on the web page www. Es This registration means we can inform you, if necessary, of the evolution and maintenance of your product. Additionally, if you would like, we can also inform you about new models or news that we think may be useful for you. KOOS PLATFORM 20 MAINTENANCE Wash the plastic parts with soap and warm water, then dry all the parts properly. [. . . ]