User manual JBL 08 GTI

[. . . ] If you feel you possess the necessary skills, and prefer to install the equipment yourself, this manual will provide you with the necessary specifics to properly use the 08GTi in typical installations. Consult your JBL dealer, or a qualified technician, for more information. Autosound at its Best The 08GTi has been built to meet the same rigorous standards of construction and performance that have long established JBL's renowned home and professional speaker systems. The 08GTi incorporates advanced JBL pure titanium technology which is especially suited to the unique acoustic environment of modern vehicles. The 08GTi has been engineered to provide excellent dispersion and frequency response, along with minimum size and flexible installation options for optimizing placement within the vehicle. [. . . ] Use three 3/4" mounting screws to secure the mounting plate in place as shown in Figure A. b) Run the included speaker wire with the 08GTi crossover to the wire feed-through hole and connect the wire to the tweeter making sure to connect + to + and ­ to ­. c) Push the tweeter down onto the mounting plate making sure to line up the bayonet tabs with the slots in the tweeter housing. Surface Mounting Instructions a) Using the Mounting Plate Template at the back of this manual. Pick a mounting location for the tweeter making sure that speaker wire can be run to this location. Flat surfaces 10 d) Twist the tweeter clockwise about 1/4" to lock it into position. D C A Figure A B SURFACE MOUNT INSTALLATION 11 Surface Angle Mounting Instructions a) Using the Surface Angle Mount template at the back of the manual, drill two screw holes at the desired mounting location. Secure the Surface angle mount adapter with two 3/4" sheet metal screws as shown in figure B. b) Secure the mounting plate to surface angle mount adapter using two 5/16" screws. c) Run the included speaker wire with the 08GTi crossover to the wire through hole and connect the wire to the tweeter making sure to connect + to + and ­ to ­. d) Push the tweeter down onto the mounting plate making sure to line up the bayonet tabs with the slots in the tweeter housing. e) Twist the tweeter clockwise about 1/4" to lock it into position. 12 D A C B Figure B SURFACE ANGLE INSTALLATION 13 Flush Mounting Instructions a) Use a hole saw or other tool and the Flush Mount Template at the back of this manual to make a hole for the flush mount cup in the desired location. Secure the metal spring to the flush mount cup using one metal spring screw as shown in figure C. Tighten the screw only enough to keep the metal spring from falling off. b) Push the flush mount cup with the metal spring into the hole that was cut in step a. c) Tighten the larger 3/4" spring mounting screw to lock the flush mounting cup into the mounting hole. Flush Mount Cup A C B Figure C FLUSH MOUNT INSTALLATION 14 d) Secure the mounting plate to the flush mount cup using three 5/16" screws. Connect the speaker wire to the tweeter. (See Figure D) e) Push the tweeter down onto the mounting plate making sure to line up the bayonet tabs with the slots in the tweeter housing. f) Twist the tweeter clockwise about 1/4" to lock it into position. FLUSH MOUNT INSTALLATION Figure D E F D 15 Flush Angle Mounting Instructions a) Follow steps a through c in the Flush Mounting Instructions. b) Secure the flush angle mount adapter to the flush mount cup using two 5/16" screws as shown in Figure E. c) Connect the 08GTi speaker wires (with crossover) to the tweeter. d) Press the tweeter down onto the flush angle mount adapter lower portion making sure to line up the snaps with the slots in the tweeter housing. [. . . ] The 08GTi will sound distorted if it is used without a crossover or protection network. Never use the 08GTi without one of the 24 recommended crossover options. If you want to talk to us about any problems, call JBL Customer Service at 1-800-3364JBL(4525) between 9AM and 5PM eastern time. Specifications: Frequency response without crossover: 3. 5kHz - 22kHz Frequency response with supplied protection network: 5Khz - 22kHz I. E. C. power handling with included 5kHz Protection network: 60 Watts RMS Power handling with 3. 5kHz 18dB/octave active crossover: 60 Watts RMS Recommended system amplifier power range: 20 Watts­ 125 Watts RMS per channel Sensitivity: 92dB @ 2. 83V / 1Meter Dimensions: Overall Diameter: 50mm / 1. 95 inches Height: 18mm / 0. 69 inches Height with angle adapter: 38mm / 1. 5 inches Flush mount cutout diameter: 54mm / 21/8 inches Flush mount depth: 23mm / 0. 9 inches 25 Drill 11/32" (8. 7mm) holes for wire feed through Drill 3/32" (2. 9mm) hole in two places 26 Tweeter is angled in this direction 08GTi SURFACE ANGLE MOUNT TEMPLATE Drill 11/32" (8. 7mm) holes for wire feed through 08GTi MOUNTING PLATE TEMPLATE Drill 3/32" (2. 4mm) holes for mounting screw 27 Cut Hole Using 21/8-21/4" (54mm) hole saw 08GTi FLUSH MOUNT TEMPLATE 29 JBL continually engages in research related to products improvement. [. . . ]