User manual JBL DD55000 EVEREST

[. . . ] A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] · Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by JBL could void the user's authority to operate the equipment. Battery Disposal Alkaline batteries are considered non-hazardous. Rechargeable batteries (i. e. , nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. In the European Union and other locations, it is illegal to dispose of any battery with household trash. All batteries must be disposed of in an environmentally sound manner. Contact your local waste management officials for information regarding the environmentally sound collection, recycling and disposal of used batteries. IC Statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 3 jbl on stage micro II easy setup guide Carefully unpack your speaker system and identify all its components. JBL On Stage Micro II, power supply, remote and adapter. Step 2. Move the battery door to the unlocked position to open the battery compartment. Step 3. Place 4 AAA batteries in the battery compartment. Step 4. Connect the power adapter into the jack labeled "6V DC In" on the rear of the JBL On Stage Micro II and plug the power adapter into a wall outlet or power strip. or * Auxilary audio cables not included Step 5. Make sure audio signal is supplied through docked iPhone/iPod or "Audio In" jack. No power; green LED is not on Check the connection of the wall adapter. Place the wall adapter in a known powered outlet. Test the outlet with a lamp or other device. Connect the JBL On Stage Micro II to a known audio source. Test the audio source with headphones. 6 Troubleshooting Symptom There is no sound coming from the JBL On Stage Micro II. Possible Problem No power to unit. Solution Make sure that the wall outlet or power strip has power. Make sure that all switches for outlet/power strip are on and that all switches for the unit are on. Make sure that the iPhone/iPod is properly docked or that the auxiliary cable is properly connected. Check the unit with a source that you know to be good. Connect the "Aux In" cable to the headphone jack of your iPhone/iPod. Note Is the LED on?If the LED is not on, power is not getting to your JBL On Stage Micro II. Try the solutions shown. Incorrect source selection. Sound comes from only one side/channel. iPhone/iPod or auxiliary cable is not seated properly. Make sure that the iPhone/iPod is seated all the way into the docking station. [. . . ] Change batteries immediately or switch to the power adapter. 9 JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. *The trademark On Stage is used with permission of OSA International, Inc. iPhone is a trademark of Apple Inc. , registered in the U. S. iPod is a trademark of Apple Inc. , registered in the U. S. [. . . ]