User manual JBL DSC 500

[. . . ] DSC 500 X + 0 + Y 2 0 M HZ OWNER'S GUIDE PRODUCT LINE: ® MODEL NUMBER: DSC 500 (230V) DESIGN GOAL: Bring the thrill of live performance and movie sound to the home environment by calling on JBL's professional engineering leadership. SATELLITE TYPE: Titanium-laminate-dome tweeter SUBWOOFER TYPE: Bass-reflex enclosure PORT DESIGN: FreeFlowTM flared PROFESSIONAL REFERENCE: Cinema Systems WELCOME And thank you for purchasing this JBL Digital Simply Cinema system. This state of the art system includes everything you need to experience movie theater quality digital video and audio in the comfort of your own living room. The only thing you need to add is your own TV. [. . . ] · If the disc you are viewing does not support the On Screen Display (OSD) language you selected, the player will automatically default to the language specified on the disc itself. Selects the aspect ratio of the TV set to be connected. · NORMAL/PS (4:3 Pan & Scan mode):Used when you connect a normal TV to the system. Displays a wide picture on the whole TV screen with a portion (right and left sides of the picture) automatically cut off. · NORMAL/LB (4:3 Letterbox mode): Used when you connect a normal TV to the system. Displays a wide picture with bands displayed on the upper and lower portions of the screen. · 16:9 (Widescreen mode): Used when you connect a widescreen TV to the system or a normal 4:3 TV, that can be turned to 16:9 mode. NORMAL/PS OK F, G, D, E Screen Saver Setting (SCR Saver) Path: Main Page © General Page © SCR Saver setup TV DISPLAY TV TYPE ANGLE MARK VIDEO OUT OSD LANG ON OFF 1. Use (DE) to select GENERAL SETUP, and then press OK. Turns the screen saver option on or off (default is on). If you turn the screen saver on, the screen saver image appears when you leave the system in pause or stop mode for more than 1 minute. The screen saver is useful to prevent your display from becoming damaged. · OFF: Turns the screen saver off. NORMAL/LB SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP 16 : 9 2. Select OSD LANG using (DE), then press b to go to the right option list. Select the desired language using (DE), then press OK to confirm your selection. Notes: · Some widescreen discs that do not permit Pan & Scan mode playback are automatically played in Letterbox mode. 25 GENERAL SETUP (CONTINUED) · Depending on the DVD, 4:3 Letterbox may be selected automatically instead of 4:3 Pan & Scan and vice versa. · You must also set the screen mode on your widescreen TV to "FULL". · If 16 : 9 is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin). · If 16 : 9 is selected and a normal 4:3 TV, switchable to 16:9 mode, is connected, to avoid vertically distorted videos the TV must be turned to 16:9 mode manually when 16:9 content is played. This is done automatically when the unit is connected to the TV via SCART, but then the TV must be turned to 4:3 mode manually when 4:3 content is played, otherwise it will be shown compressed vertically. Select MULTI, NTSC or PAL using (DE), then press OK to confirm your selection. Video Output Setting The initial default Video Output Mode setting for this system is "SCART RGB" which is the correct setting when you are connecting this system to your TV using the supplied SCART connector. There is no need to change the video output mode setting. A composite video signal is always available at the Video Out jack, should you wish to use this as your preferred connection method. If you wish to choose an S-VIDEO signal as your video output, this is available via the S-VIDEO socket only and is selected by accessing the VIDEO OUT options in the menu. [. . . ] Furthermore, the data capacity of a dual-layer and single-sided DVD is 8. 5 GB, a single-layer and double-sided DVD 9. 4 GB, and a dual-layer and double-sided DVD 17 GB. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 of its original size. The DVD also uses the variable rate coding technology that changes the data to be allocated according to the status of the picture. [. . . ]