Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL EC35 BLACK ASH EC35. We hope that this JBL EC35 BLACK ASH EC35 user guide will be useful to you.
Lastmanuals help download the user guide JBL EC35 BLACK ASH EC35.
Manual abstract: user guide JBL EC35 BLACK ASH EC35
Detailed instructions for use are in the User's Guide.
[. . . ] Slight variations will not diminish your listening pleasure. All of the Northridge E Series loudspeakers referred to in this guide are video-shielded and can safely be placed near a television.
MODELS: E60, E80, E90, E100
MODELS: E30, E50 As front speakers
As surround speakers
5 6 ft. (1. 5m1. 8m)
MODEL: EC35
0 2 ft. [. . . ] It is important to connect both speakers identically: (+) on the speaker to (+) on the amplifier and () on the speaker to () on the amplifier. Wiring "out of phase" results in thin sound, weak bass and poor imaging. To use the binding-post speaker terminals, unscrew the colored collar until the pass-through hole in the center post is visible. Insert the bare end of the wire through this hole; then screw the collar down until the connection is tight.
High Frequency +
+ Low Frequency
+ Amplifier
Bi-Wire Connections
TROUBLESHOOTING
If there is no sound from any of the speakers: If the system plays at low volumes but shuts off as volume is increased: If there is no sound from the surround speakers:
· Check that receiver/amplifier is on and that a source is playing. · Review proper operation of your receiver/amplifier.
If there is no sound coming from one speaker:
· Check all wires and connections between receiver/ amplifier and speakers. · Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured. · If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier.
If there is no (or low) bass output:
· Check all wires and connections between receiver/ amplifier and speakers. Make sure none of the speaker wires are frayed, cut or punctured. · Review proper operation of your receiver/amplifier and its surround sound features. · Make sure the movie or TV show you are watching is recorded in a surround sound mode. If it is not, check to see whether your receiver/ amplifier has other surround modes you may use. · In Dolby Digital or DTS modes, make sure your receiver/processor is configured so that the surround speakers are enabled. · Review the operation of your DVD player and the jacket of your DVD to make sure that the DVD features the desired Dolby Digital or DTS mode, and that you have properly selected that mode using both the DVD player's menu and the DVD disc's menu.
· Check the "Balance" control on your receiver/ amplifier. [. . . ] DTS is a registered trademark of Digital Theater Systems, Inc. ** The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL EC35 BLACK ASH EC35
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL EC35 BLACK ASH EC35 will begin.
