User manual JBL GTO506C

[. . . ] Remember to keep your sales receipt and this manual in a safe place so both are available for future reference. INSTALLATION WARNINGS AND TIPS ABOUT THESE INSTRUCTIONS Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install Grand Touring Series component systems in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized JBL car audio dealer about professional installation options. [. . . ] · Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. · Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface. · At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas. · Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw. · For door installations, check the clearance with the windows throughout the range of the window's travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism. · If mounting speakers elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements. · Do not mount speakers where they will get wet. · If possible, select a mounting site for the crossover network that is near the speakers and provides easy access for connections. INSTALLATION Figure 1. Mounting the GTO506c woofer with the grille. Mounting the GTO606c woofer in a standard 6" opening. NOTE: The GTO606c uses an adapter to fit a variety of different 6" openings. Select an appropriate adapter ring and secure it to the vehicle using the sheet-metal screws provided, then attach the speaker to the ring with the machine screws. Mounting the GTO606c woofer with the grille. ADAPTER RING Figure 4. Mounting the GTO606c woofer in a 165mm speaker location. The GTO8606c woofer mounts similarly in 6" x 8" or 5" x 7" openings. INSTALLATION Figure 5. Mounting the tweeter using the I-Mount flush-mounting kit. blk red 1) push in 2) turn 3) 4) CONNECTIONS Open the crossover housing by firmly squeezing the sides of the top half and lifting it away from the bottom. [. . . ] Mounting the tweeter using the I-Mount surface-mounting kit. blk red 1 2 ­ + SPECIFICATIONS Type: Speaker Impedance: Power Handling: Sensitivity (2. 83V, 1m): Frequency Response: Mounting Depth: Cut-Out Diameter: GTO506c 5-1/4" two-way component system 4 ohms 55W RMS, 165W Peak 89dB 70Hz ­ 21kHz 2-5/16" (59mm) 4-11/16" (120mm) GTO606c 6-1/2" two-way component system 4 ohms 70W RMS, 210W Peak 90dB 55Hz ­ 21kHz 2-1/16" (53mm) 5-1/8" (131mm) GTO8606c 6" x 8" (and 5" x 7") two-way component system 4 ohms 70W RMS, 210W Peak 90dB 50Hz ­ 21kHz 2-7/16" (62mm) 7-3/16" x 4-15/16" (183mm x 126mm) GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones. A valid serial number is required for warranty coverage. [. . . ]