Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL GTO 5355. We hope that this JBL GTO 5355 user guide will be useful to you.
Lastmanuals help download the user guide JBL GTO 5355.
Detailed instructions for use are in the User's Guide.
[. . . ] · Four-channel operation: Connect the stereo speakers to the Front terminals, as above. Connect the single speaker into which the amplifier's rear channels will be bridged to the Rear R+ and Rear L terminals. Connect the subwoofer to the Sub+ and Sub terminals · Three-channel (bridged) operation: Connect one speaker to the Front R+ and Front L terminals. [. . . ] · FLAT: Select for full-range speakers when no subwoofer will be used in the system. · HPF: Select for midrange speakers or full-range speakers when a subwoofer is used in the system. Power On LED · Illuminated when the amplifier is on. Subwoofer Input Connector (RCA) · Connect to the subwoofer RCA outputs from the source unit, or signal processor. Rear Crossover-Filter Selector · LPF: Select for subwoofer(s). · FLAT: Select for full-range speakers when no subwoofer will be used in the system. · HPF: Select for midrange speakers or full-range speakers when a subwoofer is used in the system. Rear Crossover-Frequency Control · 12dB/octave crossover, variable from 32Hz to 320Hz. · See the adjustment procedure in . Rear Input-Level Control · Used to match the rear input of the amplifier to the output of the source unit. Rear Input Connectors (RCA) · Connect to rear RCA outputs from the source unit, or signal processor. EXT/INT Switch · If the source unit has a subwoofer output and you have connected it to the SUB input, set this switch to the EXT position. Optional Subwoofer Remote Level Control Connector · Connect the Remote Level Control (RLC) here, using the RJ-11 cable (supplied with the RLC).
Subwoofer Level Control · Used to match the SUB input of the amplifier to the output of the source unit. Protect LED · Illuminated under any of the following fault conditions: battery over/under voltage, short circuit in speaker wires, amplifier is too hot, amplifier's output circuit has failed (DC voltage present in the amplifier's output). [. . . ] D Crossover setting for systems that include separate mid-bass speakers driven by the rear channels, with the BP switch set to "BP. " Note: Acceptable frequency ranges are indicated in gray. Remote Level Control (Optional) The Remote Level Control, if installed, will allow you to adjust the level of bass while seated in the listening position.
This product is designed for mobile applications and is not intended for connection to the mains. A valid serial number is required for warranty coverage. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL GTO 5355
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL GTO 5355 will begin.
