User manual JBL GTQ400

[. . . ] Remember to keep your sales receipt and this manual in a safe place so both are available for future reference. INSTALLATION WARNINGS AND TIPS ABOUT THESE INSTRUCTIONS Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install Grand Touring Series multielement speakers in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized JBL car audio dealer about professional installation options. [. . . ] If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized JBL car audio dealer about professional installation options. LOUD MUSIC AND HEARING Playing loud music in an automobile can hinder your ability to hear traffic as well as permanently damage your hearing. The maximum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. JBL accepts no liability for hearing loss, bodily injury, or property damage as a result of use or misuse of this product. REAR DECK PRECAUTION In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location!INSTALLATION TIPS · Always wear protective eyewear when using any tools. Modifying the GTO426 to be installed in locations requiring fewer than four mounting "ears. " NOTE: Grip the tab (preferably with pliers) and bend to detach it from the speaker. INSTALLATION Figure 3. NOTE: The GTO8626 and GTQ400 speakers are designed to be installed under factory grilles. Consequently, no grilles are packaged with these models. Mounting the GTO626 or GTO636 using the supplied grilles. Mounting the GTO626 or GTO636 in 165mm speaker locations. Mounting the GTO626 and GTO636 in standard speaker locations. NOTE: The GTO326 mounts similarly. Rotate tweeter so it is angled toward the listener using the UniPivotTM (patent no. 6, 002, 780) feature on the GTO526, GTO626, GTO926 and GTO8626. NOTE: The GTO626 and GTO636 use an adapter to fit a variety of different 6" openings. Select an appropriate adapter ring and secure it to the vehicle using the sheet-metal screws provided, then attach the speaker to the ring with the machine screws. SPECIFICATIONS Type: Speaker Impedance: Power Handling: Sensitivity (2. 83V, 1m): Frequency Response: Mounting Depth: Cut-Out Diameter: GTO326 3-1/2" two-way 4 ohms 25W RMS, 75W Peak 89dB 90Hz ­ 21kHz 1-7/16" (37mm) 3-5/16" (85mm) GTO426 4" two-way 4 ohms 35W RMS, 105W Peak 89dB 90Hz ­ 21kHz 2-1/8" (54mm) 3-5/8" (93mm) GTO526 5-1/4" two-way 4 ohms 45W RMS, 135W Peak 89dB 70Hz ­ 21kHz 2-3/8" (61mm) 4-11/16" (120mm) GTO626 6-1/2" two-way 4 ohms 60W RMS, 180W Peak 90dB 55Hz ­ 21kHz 2-1/8" (54mm) 5-1/8" (131mm) GT0636 6-1/2" three-way 4 ohms 60W RMS, 180W Peak 90dB 55Hz ­ 21kHz 2-1/8" (54mm) 5-1/8" (131mm) GTO926 6" x 9" two-way 4 ohms 100W RMS, 300W Peak 91dB 50Hz ­ 21kHz 3-1/4" (83mm) 8-13/16" x 6" (224mm x 153mm) GTO936 6" x 9" three-way 4 ohms 100W RMS, 300W Peak 91dB 50Hz ­ 21kHz 3-1/4" (83mm) 8-13/16" x 6" (224mm x 153mm) GTQ400 4" x 6" two-way 4 ohms 40W RMS, 120W Peak 89dB 75Hz ­ 21kHz 1-13/16" (47mm) 5-3/4" x 3-5/16" (147mm x 85mm) GTO8626 6" x 8" (and 5" x 7") two-way 4 ohms 60WRMS, 180W Peak 90dB 50Hz ­ 21kHz 2-7/16" (62mm) 7-3/16" x 4-15/16" (183mm x 126mm) GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. [. . . ] Mounting the GTO626 and GTO636 in standard speaker locations. NOTE: The GTO326 mounts similarly. Rotate tweeter so it is angled toward the listener using the UniPivotTM (patent no. 6, 002, 780) feature on the GTO526, GTO626, GTO926 and GTO8626. NOTE: The GTO626 and GTO636 use an adapter to fit a variety of different 6" openings. Select an appropriate adapter ring and secure it to the vehicle using the sheet-metal screws provided, then attach the speaker to the ring with the machine screws. SPECIFICATIONS Type: Speaker Impedance: Power Handling: Sensitivity (2. 83V, 1m): Frequency Response: Mounting Depth: Cut-Out Diameter: GTO326 3-1/2" two-way 4 ohms 25W RMS, 75W Peak 89dB 90Hz ­ 21kHz 1-7/16" (37mm) 3-5/16" (85mm) GTO426 4" two-way 4 ohms 35W RMS, 105W Peak 89dB 90Hz ­ 21kHz 2-1/8" (54mm) 3-5/8" (93mm) GTO526 5-1/4" two-way 4 ohms 45W RMS, 135W Peak 89dB 70Hz ­ 21kHz 2-3/8" (61mm) 4-11/16" (120mm) GTO626 6-1/2" two-way 4 ohms 60W RMS, 180W Peak 90dB 55Hz ­ 21kHz 2-1/8" (54mm) 5-1/8" (131mm) GT0636 6-1/2" three-way 4 ohms 60W RMS, 180W Peak 90dB 55Hz ­ 21kHz 2-1/8" (54mm) 5-1/8" (131mm) GTO926 6" x 9" two-way 4 ohms 100W RMS, 300W Peak 91dB 50Hz ­ 21kHz 3-1/4" (83mm) 8-13/16" x 6" (224mm x 153mm) GTO936 6" x 9" three-way 4 ohms 100W RMS, 300W Peak 91dB 50Hz ­ 21kHz 3-1/4" (83mm) 8-13/16" x 6" (224mm x 153mm) GTQ400 4" x 6" two-way 4 ohms 40W RMS, 120W Peak 89dB 75Hz ­ 21kHz 1-13/16" (47mm) 5-3/4" x 3-5/16" (147mm x 85mm) GTO8626 6" x 8" (and 5" x 7") two-way 4 ohms 60WRMS, 180W Peak 90dB 50Hz ­ 21kHz 2-7/16" (62mm) 7-3/16" x 4-15/16" (183mm x 126mm) GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. [. . . ]