User manual JBL JBL 6012 SERVICE MANUAL

[. . . ] The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. 12. [. . . ] To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. Do not expose batteries to excessive heat such as sunshine, fire or the like. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO CONSTITUTEA RISK OF ELECTRIC SHOCK TO PERSONS. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. THE EXCLAMATION POINT WITHIN AN EQUILA TERAL TRIANGLE IS INTENDED TO ALERT THE USERTO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT. IC Statement and Warning This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada . SEE MARKING ON BACK OF PRODUCT. 2 CONNECTING AND SETTING UP YOUR JBL JBL 6012TM SPEAKER DOCK 1. Carefully unpack your speaker dock, and confirm that all the items shown here are included: JBL® OnBeat speaker dock, power supply, AC cord*, remote control, iPod®/iPhone® adapter clip and iPadTM adapter clip. If you are going to use your JBL OnBeat speaker dock with another audio source, plug one end of a 3. 5mm (1/8") stereo cable (not included) into the JBL OnBeat speaker dock Audio In connector, and plug the other end into the audio source's audio out or headphone out connector. DC IN POWER AUDIO IN USB VIDEO OUT 3. 5mm (1/8") cable * AC cord varies by region. 2. Connect a USB Type Mini B cable (not included) to the JBL OnBeat speaker dock USB port and to a USB port on the computer on which your iTunes library is located. This allows you to sync a docked iPod/ iPhone/iPad device with iTunes® (see Synchronizing with your iTunes Library, on page 6). IMPORTANT: If you play audio through a docked iPod, iPhone or iPad device and an audio source connected to the Audio In connector at the same time, you will hear both of their outputs mixed through the JBL OnBeat speaker dock. The JBL OnBeat speaker dock will automatically enter the Standby mode whenever no control buttons have been pressed and no audio signal has been present for 10 minutes. REMOTE CONTROL FUNCTIONS Volume Down Volume Up Play/Pause* Mute/Unmute Next/Fast Forward (Hold for fast forward) Menu Scroll Up Power Button Volume Buttons Menu Scroll Down Menu Adjust the volume using the (+) and (­) buttons. Press both buttons simultaneously to mute the sound; press either button to unmute the sound. Menu Select/Enter * iPod touch, iPhone and iPad menu navigation may require you to put the iPod/iPhone/iPad device in music mode manually. 5 English ROTATING THE DOCK When an iPod or iPhone device is docked in the JBL OnBeat speaker dock, you can rotate the dock to the landscape mode. IMPORTANT: You cannot rotate the dock when an iPad device is docked. To rotate the dock to the landscape mode, turn it 90 degrees counterclockwise. To rotate it back to the portrait mode, turn it 90 degrees clockwise. The dock will hold in place at the portrait and the landscape positions. SYNCHRONIZING WITH YOUR iTunes LIBRARY NOTE: Before attempting to synchronize your iPod/iPhone/iPad device with your iTunes library, be sure that both your iPod/iPhone/iPad device and your iTunes library are updated to the latest software version. Before attempting to synchronize, be sure that the JBL OnBeat speaker dock USB port is connected to the computer on which your iTunes library is located. Place your iPod/iPhone/iPad device on the JBL OnBeat speaker dock docking connector. Make sure the iPod/iPhone/iPad device is inserted all the way onto the connector. Use your computer's iTunes software to synchronize the iPod/ iPhone/iPad device with the iTunes library. [. . . ] 6 White ­ Constant White ­ Flashing Amber ­ Constant No LED JBL OnBeat speaker dock is on JBL OnBeat speaker dock is muted JBL OnBeat speaker dock is in Standby mode JBL OnBeat speaker dock is off TROUBLESHOOTING YOUR JBL JBL 6012 SPEAKER DOCK PROBLEM SOLUTION dock and to a working AC outlet. docked in the JBL OnBeat speaker dock. connected to the JBL OnBeat speaker dock Audio In connector and to the source component's audio output. Pause mode and that its volume control is not turned all the way down. dock Audio In jack. docking connector. dock Audio In jack. 7 English SPECIFICATIONS Compatibility*: iPad Wi-Fi® + 3G, iPad Wi-Fi, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod touch 4G, iPod touch 3G, iPod touch 2G, iPod touch, iPod nano 5G, iPod nano 4G, iPod nano 3G, iPod nano 2G, iPod nano, iPod 5G, iPod classic 2 x JBL® Phoenix SE full-range transducers 4 watts x 2 70Hz ­ 20kHz 80dB 10k ohms Main connection ­ iPod, iPhone or iPad docking connector; Aux input connection ­ 1/8" (3. 5mm) stereo mini-jack 32°F ­ 104°F; 0°C ­ 40°C 13V DC, 2. 5A 30W (maximum); 0. 5W (standby) 5-3/4" x 10-13/16" x 5-5/16" (146mm x 275mm x 135mm) 1. 9 lb (0. 88kg) Black; white Transducers: Power: Frequency response: Signal-to-noise ratio: Input impedance (Aux): Input connections: Operating temperature: Power requirement: Power consumption: Dimensions (H x W x D): Weight: Available finishes: * Compatibility at time of writing. [. . . ]