User manual JBL ON STAGE MICRO II

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 7. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 3 jbl on stage micro II easy setup guide Carefully unpack your speaker system and identify all its components. JBL On Stage Micro II, power supply, remote and adapter. Step 2. Move the battery door to the unlocked position to open the battery compartment. Step 3. Place 4 AAA batteries in the battery compartment. Step 4. Connect the power adapter into the jack labeled "6V DC In" on the rear of the JBL On Stage Micro II and plug the power adapter into a wall outlet or power strip. or * Auxilary audio cables not included Step 5. Place the appropriate iPhone/iPod adapter onto JBL On Stage Micro II. Place your iPhone/iPod on the docking connector or connect a 3. 5mm (1/8") stereo audio cable to the rear of the JBL On Stage Micro II. Connect the audio cable to the audio source. Press the Power button on the back of the JBL On Stage Micro II. A green LED will light when the JBL On Stage Micro II system is on. - + Step 7. Adjust the volume using (+) to increase and (­) to decrease. Press both to mute the JBL On Stage Micro II. Press either button to unmute. Syncing and transfering files with your computer Make sure your iPhone/iPod is securely docked into the JBL On Stage Micro II. Connect a USB cable (not included) into the USB jack on the back of the unit, connect other end of the USB cable directly to your computer's USB port. Make sure your iPhone/iPod and iTunes are updated to the latest software version. 4 troubleshooting your jbl on stage micro II Technical Specifications Troubleshooting Symptom Possible Problem No power to the system Power adapter plug is not inserted correctly No volume or low volume Solution Ensure that the power supply is connected to a live power source and properly connected to the JBL On Stage Micro II. Note: When the JBL On Stage Micro II is powered, a green power LED on the JBL On Stage Micro II should light up. Touch the volume "Up" (+) pad on the volume control to unmute and/or increase the system volume level. Note: Touching the volume "Down" (­) pad lowers the system volume. Touching both the (+) and (­) volume control pads at the same time will mute the system. Input source is low Low or drained batteries iPhone/iPod is paused iPhone/iPod is paused (battery-only mode) Increase the volume level on the audio source device. [. . . ] Purchase a ferrite core and wrap the excess cable around it. A ferrite core can be purchased at your local electronics store. JBL On Stage Micro II emits a loud hum or buzzing noise. Input cable is not plugged in properly. Ground logo (an unsuitable connection). Speaker system experiences radio-frequency interference or picks up a radio-station transmission. Input cable may be picking up interference. 8 jbl on stage micro II remote easy setup guide Volume Down iPhone/iPod Play/Pause1 iPhone/iPod Previous/Rewind *Hold for "rewind" iPhone/iPod Scroll Up iPhone/iPod Menu Volume Up Mute/Unmute1 iPhone/iPod Next/Fast Forward *Hold for "fast forward" iPhone/iPod Scroll Down iPhone/iPod Select/Enter Additional Features: 1. In the battery-only mode, the JBL On Stage Micro II loudspeaker dock will turn off to save battery power when muted or paused for longer than 10 minutes. [. . . ]