User manual JBL SCS110

[. . . ] Please take a moment to complete the enclosed profile card. It enables us to keep you posted on our latest advancements, and helps us to better understand our customers and build products that meet your needs and expectations. [. . . ] With the receiver/amplifier still turned off, confirm that its volume control is turned all the way down. If the receiver/amplifier has an A/B speaker switch, set it to correspond to the speaker terminals connected to the SCS110 system. Now, turn on your receiver/ amplifier and select a music source such as a CD player, cassette deck or FM tuner. Turn up the volume control slowly until you hear sound from the speakers. Rotate the balance control all the way to the left. Sound should come only from the left speaker. If the sound comes from the right speaker with the balance control to the left, the speaker wires have been reversed during hook-up. Turn the receiver/ amplifier "off" and switch both sets of speaker wires. Dolby Pro Logic*-equipped devices (AV Receivers, Surround Sound processors or decoders, TVs or other sources) include a "test tone" you can use to balance the volume of all the speakers in a surround sound system. Refer to the instructions accompanying your component for selecting the test tone mode and using it to balance speaker levels in your home theater. Troubleshooting If there is no sound from any of the speakers, check the following: · Receiver/amplifier is on and a source is playing. · Review proper operation of your receiver/amplifier. If there is no sound coming from one speaker, check the following: · Check the "Balance" control on your receiver/amplifier. [. . . ] Notice to Purchaser: JBL assumes no responsibility or liability for injuries or property damage ­ direct, indirect, or consequential ­ resulting from the improper installation of these loudspeakers. sat10 Surround Speakers Declaration of Conformity We, JBL Europe A/S Kongevejen 194B DK-3460 Birkerød DENMARK declare in own responsibility, that the products described in this owner's manual are in compliance with technical standards: EN 50 081-1/1992 EN 50 082-1/3. 1995 Recommended Power 10 ­ 70 watts Impedance 8 ohms nominal Sensitivity 90dB @ 1 watt/1 meter Frequency Response 100Hz ­ 15kHz (±3dB) Dimensions (HxWxD) 6-1/2 x 3-3/4 x 4-1/4 inches 165 x 95 x 108mm Weight 1. 5 lbs/. 7 kg CEL EB RAT I Steen Michaelsen JBL Europe A/S Birkerød. 7/96 0 YEAR JBL Consumer Products 80 Crossways Park West, Woodbury, NY 11797 8500 Balboa Boulevard, Northridge, CA 91329 1-800-336-4JBL (4525) (USA only) 1996 JBL, Incorporated. [. . . ]