Detailed instructions for use are in the User's Guide.
[. . . ] It is the ideal way to re-create the cinematic experience in your home.
®
NORTHRIDGE E SERIES E30, E50, T420, E80, E90, E100, EC35
TM
OWNER'S GUIDE
SPEAKER CONNECTIONS
The hole in the center of each collar is intended for use with banana-type connectors. To comply with European CE certification, these holes are blocked with plastic inserts at the point of manufacture. To use banana-type connectors requires the removal of the inserts. Do not remove these inserts if you are using the product in an area covered by the European CE certification. [. . . ] BI-WIRING The bi-wire connection method requires one amplifier and two sets of speaker wires. By removing the shorting bars, connections may be made to the individual network sections using four conductors, one for each of the four terminals. For single-wire connection, leave the shorting bars in place and connect only a single set of speaker wires (two conductors) to the two upper terminals.
MODELS: E30, EC35, E50
MODELS: E30, E50, T420, E80, E90, E100
RIGHT LEFT
The supplied self-adhesive rubber feet may be attached to the bottom corners of your speakers to protect your furniture.
MODELS: T420, E80, E90, E100
+
+
+
RIGHT
+
LEFT
Receiver's Speaker Outputs
MODEL: EC35
CENTER
+
+
These models feature four rubber feet that enable them to be placed on a smoothsurfaced floor, such as tile or hardwood. Four metal spikes are supplied for use when the speaker is to be placed on a carpeted surface, to decouple the speaker from the floor and prevent unwanted damping. To insert the spikes, gently lay the speaker on its side (not its front or back) on a soft, nonabrasive surface. Each spike screws into the threaded insert in the center of each rubber foot. Make sure all four spikes are screwed in completely for stability. NEVER drag the speaker to move it, as this will damage the spikes, the feet and/or the wood cabinet itself. Always lift the speaker and carry it to its new location. CAUTION: Floorstanding (tower) loudspeakers have a high center of gravity and may become unstable and tip over during earthquakes, or if rocked, tipped or improperly positioned. · Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured. · In Dolby* Digital or DTS® modes, make sure that the receiver/processor is configured so that the speaker in question is enabled. · Turn off all electronics and switch the speaker in question with one of the other speakers that is working correctly. Turn everything back on, and determine whether the problem has followed the speakers, or has remained in the same channel. If the problem is in the same channel, the source of the problem is most likely with your receiver or amplifier, and you should consult the owner's manual for that product for further information. If the problem has followed the speaker, consult your dealer for further assistance or, if that is not possible, visit www. jbl. com for further information.
· Make sure the polarities (+ and ) of the left and right "Speaker Inputs" are connected properly. · Consider adding a powered subwoofer to your system for use with digital ". 1" surround formats.
Declaration of Conformity
We, Harman Consumer International 2, route de Tours 72500 Chateau-du-Loir France declare in own responsibility that the products described in this owner's manual are in compliance with technical standards: EN 50081-1:1992 EN 50082-1:1997 Gary Mardell Harman Consumer International Chateau-du-Loir, France 7/03
SPECIFICATIONS
E30
Description 2-Way 6" bookshelf
E50
T420
E80
Description 3-Way dual 6" floorstanding
E90
Description 3-Way dual 8" floorstanding Max. Recommended Amplifier Power** 225W Power Handling (Continuous/Peak) 110W/440W Nominal Impedance 8 Ohms Sensitivity (2. 83V/1m) 91dB Frequency Response (3dB) 36Hz 20kHz Crossover Frequencies 300Hz, 4000Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded
E100
Description 3-Way dual 10" floorstanding
EC35
Description 3-Way dual 5" center
Description Description 3-Way, 8" 3-Way 8" horizontal/vertical floorstanding mirror-image bookshelf Max. Recommended Amplifier Power** 175W Power Handling (Continuous/Peak) 90W/360W Nominal Impedance 8 Ohms
Max. [. . . ] Recommended Amplifier Power** 175W Power Handling (Continuous/Peak) 90W/360W Nominal Impedance 8 Ohms
Max. Recommended Amplifier Power** 125W Power Handling (Continuous/Peak) 70W/280W Nominal Impedance 8 Ohms
Max. Recommended Amplifier Power** Amplifier Power** 175W 200W Power Handling (Continuous/Peak) 90W/360W Nominal Impedance 8 Ohms Power Handling (Continuous/Peak) 100W/400W Nominal Impedance 8 Ohms
Max. Recommended Amplifier Power** Amplifier Power** 250W 150W Power Handling (Continuous/Peak) 125W/500W Nominal Impedance 8 Ohms Power Handling (Continuous/Peak) 75W/300W Nominal Impedance 8 Ohms
Sensitivity (2. 83V/1m) Sensitivity (2. 83V/1m) 88dB 90dB Frequency Response (3dB) 50Hz 20kHz Crossover Frequency 4000Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded Frequency Response (3dB) 45Hz 20kHz Crossover Frequencies 800Hz, 3200Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded
Sensitivity (2. 83V/1m) Sensitivity (2. 83V/1m) 90dB 91dB Frequency Response (3dB) 40Hz 20kHz Crossover Frequencies 1000Hz, 4000Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded Frequency Response (3dB) 38Hz 20kHz Crossover Frequencies 300Hz, 4000Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded
Sensitivity (2. 83V/1m) Sensitivity (2. 83V/1m) 91dB 91dB Frequency Response (3dB) 33Hz 20kHz Crossover Frequencies 1000Hz, 5000Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded Frequency Response (3dB) 75Hz 20kHz Crossover Frequencies 800Hz, 3200Hz High-Frequency Transducer 3/4" (19mm) Titaniumlaminate dome, shielded
Midrange Transducer Midrange Transducer Midrange Transducer Midrange Transducer Midrange Transducer Midrange Transducer Midrange Transducer NA 4" (100mm) PolyPlas, TM 4" (100mm) PolyPlas, TM 4" (100mm) PolyPlas, TM 4" (100mm) PolyPlas, TM 4" (100mm) PolyPlas, TM 3" (75mm) PolyPlas, TM shielded shielded shielded shielded shielded shielded Low-Frequency Transducer 6" (170mm) PolyPlas, TM shielded Low-Frequency Transducer 8" (200mm) PolyPlas, TM shielded Low-Frequency Transducer 8" (200mm) PolyPlas, TM shielded Low-Frequency Transducers Dual 6" (170mm) PolyPlas, TM shielded Low-Frequency Transducers Dual 8" (200mm) PolyPlas, TM shielded Low-Frequency Low-Frequency Transducers Transducers Dual 10" (250mm) PolyPlas, TM Dual 5-1/4" (133mm) PolyPlas, TM shielded shielded
Baffle Baffle Baffle Baffle Baffle Baffle Baffle Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Low diffraction, IsoPowerTM Port FreeFlowTM flared Network Straight-Line Signal PathTM (SSP) Ports Port Dual FreeFlowTM flared FreeFlowTM flared Network Straight-Line Signal PathTM (SSP) Network Straight-Line Signal PathTM (SSP) Port FreeFlowTM flared Network Straight-Line Signal PathTM (SSP) Port FreeFlowTM flared Network Straight-Line Signal PathTM (SSP) Terminals Gold-plated, 5-way binding posts, bi-wirable Port FreeFlowTM flared Network Straight-Line Signal PathTM (SSP) Port FreeFlowTM flared Network Straight-Line Signal PathTM (SSP)
Terminals Terminals Gold-plated, 5-way Gold-plated, 5-way binding posts, bi-wirable binding posts, bi-wirable
Terminals Terminals Gold-plated, 5-way Gold-plated, 5-way binding posts, bi-wirable binding posts, bi-wirable
Terminals Terminals Gold-plated, 5-way Gold-plated, 5-way binding posts, bi-wirable binding posts, bi-wirable
Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) Dimensions (H x W x D) 15" x 8-3/8" x 12" 11-1/2" x 17-1/2" x 12-1/4" 36-1/2" x 9-7/8" x 12" 36-1/2" x 8-3/8" x 13-1/2" 40-1/4" x 9-7/8" x 14-1/2" 42" x 12-1/4" x 14-1/2" 7-1/4" x 22" x 10-7/16" 381mm x 213mm x 305mm 292mm x 445mm x 311mm 927mm x 251mm x 305mm 927mmx 213mm x 343mm 1022mm x 251mm x 368mm 1067mm x 311mm x 368mm 185mm x 558mm x 264mm Weight Per Speaker 16. 3 lb/7. 4kg Weight Per Speaker 25 lb/11. 4kg Weight Per Speaker 35 lb/15. 9kg Weight Per Speaker 40 lb/18. 2kg Weight Per Speaker 48 lb/21. 8kg Weight Per Speaker 55 lb/25kg Weight Per Speaker 22 lb/10kg
PRO SOUND COMES HOMETM
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 8500 Balboa Boulevard, Northridge, CA 91329 2, route de Tours, 72500 Chateau-du-Loir, France 516. 255. 4JBL (4525) www. jbl. com © 2003 Harman International Industries, Incorporated JBL is a registered trademark of Harman International Industries, Incorporated. [. . . ]