Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBL UREI 1181. We hope that this JBL UREI 1181 user guide will be useful to you.
Lastmanuals help download the user guide JBL UREI 1181.
Detailed instructions for use are in the User's Guide.
[. . . ] LOUD MUSIC AND HEARING Playing loud music in an automobile can hinder your ability to hear traffic, as well as permanently damage your hearing. The maximum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. [. . . ] REAR DECK PRECAUTION In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location. ABOUT THE CONTENTS The CS Series component system includes: · Woofers · Grilles · Tweeters with surface/flush I-MountTM (patent no. 5, 859, 917) kits INSTALLATION TIPS · Always wear protective eyewear when using any tools. · Turn off all audio components and other electrical devices before you start. Disconnect the () negative lead from your vehicle's battery. · Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Mounting the tweeter using the SMALL LUG BLACK I-Mount surface-mounting cup.
1
ATTACH BASE WITH SCREWS, THEN:
DOWN TO ADJUST TWEETER ANGLE.
2
RED (+)
BLACK (--)
TIGHTEN SCREW TO LOCK ANGLE SETTINGS.
4
RED (+) RED (+) LARGE LUG
2 3
SECURELY TIGHTEN THE LARGE HAND NUT.
Note: Check screw clearance before installing. Note: Not all possible mounting configurations are shown.
3
CONNECTIONS
Connect the tweeter using the supplied wire with inline crossover to the terminals on the woofer. Note that there are two positive and two negative terminals on the woofer. Connect the unused positive and negative terminals to your amplifier`s output leads, observing proper polarity. You must use the supplied inline crossover. Failure to do so may damage the tweeter. Wiring connections
SPECIFICATIONS
Type Power Handling Sensitivity (2. 83V/1m) Frequency Response Impedance Mounting Depth Cutout Diameter Overall Diameter UREI 1181 165mm Two-way component system 45W RMS, 135W Peak 91dB 55Hz 20kHz 4 Ohms 2-3/8" (61mm) 5-11/16" (145mm) 6-9/16" (167mm)
GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones. [. . . ] Do not use any cleaners or solvents on the grilles or the speaker cones. This product is designed for mobile applications and is not intended for connection to the mains. A valid serial number is required for warranty coverage. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBL UREI 1181
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBL UREI 1181 will begin.
