User manual JBSYSTEMS LIGHT QUICK CLAMPS 201 V1.1

[. . . ] Operation Manual WWW. BRITEQ-LIGHTING. COM Copyright © 2008 by BEGLEC cva. Reproduction or publication of the content, even portions, in any manner, without express permission of the publisher, is prohibited. V1. 1 ENGLISH OPERATION MANUAL ENGLISH OPERATION MANUAL · Always use a certified safety cable that can hold 12times the weight of the device when installing it. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the clamp fails. · The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. [. . . ] During inspection the following points should be checked: · All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. · Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. SPECIFICATIONS Maximum load: Suited tube diameters: Dimensions: Weight: Max. Service life: 200kg 48mm to 51mm 21cm (total height, incl. knob) x 10cm x 3cm +/-0, 5kg 10 years · Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. · Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. · Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual. BEFORE USE Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. briteq-lighting. com · · · · SAFETY INSTRUCTIONS: To protect the environment, please try to recycle the packing material as much as possible. Inexperienced persons should not operate this device. Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. Always use an additional appropriate and certified safety cable when installing a device. [. . . ] · Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing. · Devices should be installed out of reach of people and outside areas where persons may walk by or be seated. · Before rigging make sure that the installation area can hold a minimum point load of 10times the total weight of the device and the clamp. BriTeQ® 1/2 QUICK CLAMP BriTeQ® 2/2 QUICK CLAMP [. . . ]