User manual JBSYSTEMS LIGHT TALENT

[. . . ] Power Switch Press this switch to turn the power on, press again to turn the power off. When operating this switch, make sure that all controls are set at minimum position. [. . . ] Works in combination with the PFL/Master switch. Assign Switch With these 2 switches you can choose between which 2 channels you would like to crossfade. Punch Button When the crossfader is on the right side, you can mix in the left assigned channel just by pushing on the left Punch button (and vice versa). Crossfader With this horizontal slider you can move from one channel to an other (see 13). the sliders of the assigned channels have to be open. At center position, both channels will be heard. Channel Level Controls With these sliders you can control the volume of the 4 channels. Beat Leds Gives you a visual of the beat of the bass. Rotary Return Control This control adjusts the signal level, coming from an external device (effect), that will be added to the master output. Cue/Master Panpot This fader is used to set up mixer and special effects in the left position, `cue' is sent to the headphones. [. . . ] When the mixer is `on' and doesn't respond, please verify fuse compartment, replace if necessary with a new one of same size and values. Return Knop Regeling van het niveau dat, komende van de effectenmodule, bij de master wordt gevoegd. [. . . ]