User manual JBSYSTEMS MPL-1 V1.0

[. . . ] Check that the available voltage is not higher than the one stated in this manual. In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Please use the original packing when the device is to be transported. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. [. . . ] Don't use this unit at higher ambient temperatures. VOLUME buttons: (only on remote) The default volume level is fixed to "12", with the VOL+/- buttons on the remote control you can adapt the output volume. Press the PLAY/PAUSE button for about 2seconds to store the current radio station to a preset: In the display a preset number starts flashing Use the SKIP buttons (3) to choose the desired preset to store the current radio station Press the PLAY/PAUSE button shortly to store the radio station to the selected preset Player operation: While playing a track: press the PLAY/PAUSE button to start / pause the current audio track. While browsing folders (6): press the PLAY/PAUSE button to enter the selected folder. SKIP BACKWARD / FORWARD buttons: Radio operation: Press the SKIP buttons shortly to search manually for another radio station. Each time the button is pressed frequency changes in 0, 1MHz steps. press the SKIP buttons for about 2seconds to start auto-search for radio stations. Player operation: While playing a track: Press the SKIP buttons shortly to skip to the next/previous track. Keep one of the SKIP buttons pressed to search quickly inside the current track. REP / REPEAT button: used to select one of the 3 repeat modes of the audio player, the display shows which mode is currently selected: Repeat all: (standard mode) When all tracks on the memory device are played, playback starts again from the first track. Repeat 1+: The current track is played in an endless loop. Repeat F+: When all tracks in the folder are played, playback starts again from the first track. FOLDER button: Press this button to show the different folders (named 01\ ~ 02\ ~ 03\ ~ . Use the SKIP buttons (3) to choose a folder and press the PLAY/PAUSE button (2) to select it. When the folder contains audio tracks, the names of the audio tracks will be shown. If the folder doesn't contain any tracks, the display shows "No Song". Note: In the APL-15 only Mono playback is possible, we suggest using the tuner always in mono mode to reduce noise. Press the EQ button for about 3seconds to start the full automatic search and store function: the complete FM-range is scanned, all available radio stations are automatically stored to the (max) 30 presets. note: all previously stored station presets will be overwritten with new stations. Player operation: each time you press the EQ button, another equalizer preset is selected: normal, rock, pop, classic, jazz, blue, hall, bass, soft, country, opera. INPUT button: Press this button to select one of the 3 available options: USB-memory: if a USB memory device is inserted, the player will start playing the stored tracks. SD-card: if an SD or SDHC-card is inserted, the player will start playing the stored tracks. [. . . ] Connect it firmly to the back of the MPL-1 audio player module. Module lecteur audio compact à utiliser avec le module d'amplification APL-15 : supporte à la fois les cartes SDHC et les mémoires de type USB (clefs USB et les disques durs externes) supporte à la fois les fichiers MP3 et WMA (+ gestion des subfolders) 11 présélections d'égalisation (normal, rock, pop, classic, bass, soft, . En mode lecteur : chaque fois que l'on appuie sur la touche EQ, une autre présélection d'égalisation est sélectionnée : normal, rock, pop, classic, jazz, blues, hall, bass, soft, country, opera. Touche INPUT (entrée) : Appuyez sur cette touche pour sélectionner l'une des 3 entrées disponibles : Mémoire USB : si un support de mémoire USB est inséré dans le port adéquat, le lecteur commence à lire les pistes audio enregistrées sur ce support ; carte SD : si un support de mémoire SD ou SDHC est inséré dans le port adéquat, le lecteur commence à lire les pistes audio enregistrées sur ce support ; Radio FM : c'est la radio qui est lue ; dans ce cas, assurez-vous que l'antenne est dans une position adéquate. [. . . ]