Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JBSYSTEMS SCENE MASTER. We hope that this JBSYSTEMS SCENE MASTER user guide will be useful to you.
Lastmanuals help download the user guide JBSYSTEMS SCENE MASTER.
Manual abstract: user guide JBSYSTEMS SCENE MASTERV1.0
Detailed instructions for use are in the User's Guide.
[. . . ] `t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited. Dispose of the unit and used batteries in an environment friendly manner according to your country regulations. Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these operating instructions very carefully. [. . . ] Scene mode: each of the 16 CHANNEL faders can contain a scene, scenes can be mixed manually. While pressed together with the DISPLAY MODE button (6), you can set the controller in MIDI RECEIVE mode, see chapter "HOW TO USE" for more information. LED DISPLAY: shows different information, depending on the working mode and/or display mode. The first digit shows the unit number: unit1 is always the master. DISPLAY MODE BUTTON: press the button to browse the different display modes: Display mode 1: (led off) shows the DMX-values while a CHANNEL fader is moved (000 to 512). Display mode 2: (led off) shows the output in % while a CHANNEL fader is moved (0% to 100%). Display mode 3: (led on) shows the MIDI-values while a CHANNEL fader is moved (000 to 127). MIDI channel: press the button until the led starts blinking, the display shows the selected MIDIchannel. Press the button again until the led stops blinking. If several units are connected in master/slave, the master fader of unit1 (master unit) is used to control the output of all units together. Remark1: in both working modes MIDI data (000-127) is sent through the USB-output (10) Remark2: this fader is also used to set the desired MIDI channel, see chapter "HOW TO USE" 8. PROGRAM BUTTON: used to program a scene under one of the CHANNEL faders. While pressed together with the SCENE/MANUAL button (4), you can set the controller in PROGRAM mode. For more information on using the PROGRAM button, see chapter "HOW TO USE". While used in MIDI RECEIVE mode, you can press this button for 2 seconds to reset all scenes (set all scenes to zero). In this way you can: control MIDIapplications, let other MIDI-applications control the Scenemaster or upgrade the firmware of the Scenemaster. LINK CONNECTORS: two RJ45 connectors used to link several Scenemasters together to obtain one virtual controller with more channels and scenes. You can use standard Cat-5 network patch cables. The last working status is preserved, last active scenes will start automatically when you switch the Scenemaster back on. To obtain more DMX-channels, just link several controllers together (see below). sIMPLE MIDI-CONNECTION Simply connect the USB-output of the controller to a PC. No drivers needed, these will be automatically installed. [. . . ] (DMX and MIDI can be used together) Just use the CHANNEL faders (1), MASTER fader (7) and FLASH buttons (2) to control your MIDIapplications running on PC. (MASTER fader only works on unit 1) Remark: use the DISPLAY button (6) to switch the display to MIDI-values (0-127). MIDI COMMANDS Control Change messages are sent with status 0xBn kk vv, where n is the MIDI-channel, for the specified CC controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JBSYSTEMS SCENE MASTER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JBSYSTEMS SCENE MASTER will begin.
