User manual JBSYSTEMS SMART BEAM

[. . . ] If you sell the fixture, be sure to add this user manual. To protect the environment, please try to recycle the packing material as much as possible. Check the contents: Check that the carton contains the following items: User manual SMART BEAM BASE unit Power adapter To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. [. . . ] No objects filled with liquids, such as vases, shall be placed on this appliance. electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Don't cover any ventilation openings as this may result in overheating. Prevent use in dusty environments and clean the unit regularly. Inexperienced persons should not operate this device. maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures. minimum distances around the apparatus for sufficient ventilation is 5cm. Always unplug the unit when it is not used for a longer time or before you start servicing. Condense sometimes prevents the unit from working at full performance. CLEANING THE APPLIANCE: Clean by wiping with a polished cloth slightly dipped with water. Do not use volatile liquids such as benzene or thinner which will damage the unit. CAUTION: To reduce the risk of electric shock, do not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only This symbol means: Read instructions This symbol means: Safety Class III appliance (example: JB Systems code: 2-0370) For more information on connections, please refer to the next chapter. Be sure to turn off the unit before you make changes to the different connections. In this manual we talk about "line outputs". This is a global name for inputs with a level between 750mV and 2V. BLIND PANELS: used to close the 2 unused compartments for additional SMART BEAM players. [. . . ] MULTI-CONNECTOR CABLE: the unit contains 3 of these cables with multi-connector. SMART BEAM INPUT: this input is compatible with the 3 multiconnector cables of the SMART BEAM BASE. ANTENNA INPUT: the special "Belling-Lee" connector is used to feed the antenna signal to the FM-radio of the installed SMART BEAM players. You can connect a simple antenna or use an optional antenna cable (see picture) to connect the input to cable distribution. [. . . ]