Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JENSEN VOYAGER MCD10. We hope that this JENSEN VOYAGER MCD10 user guide will be useful to you.
Lastmanuals help download the user guide JENSEN VOYAGER MCD10.
Detailed instructions for use are in the User's Guide.
[. . . ] The mechanism in the CD changer is "locked" into place during shipment by transport screws. be sure to remove the screws prior to installation. Retain these screws for future use when transporting the unit for service/maintenance. After removing the transport lock screws, place the supplied seals over the screwholes. [. . . ] Attach the brackets (A) to the mounting base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers. Stick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. Affix the unit to the floor by pressing in place. Stick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion. Affix the unit to the floor by pressing in place. Quite los pernos hexagonales adhiriendo los soportes (A) a la base de montaje (B) y quite el cambiador de la base (Paso 3 para referencia). Using a knife, cut holes in the carpet directly above the bracket's bolts. Mettez la bande à deux faces fournie en bas des bases de montage (B) et éplucher le support en papier. Use the hexagonal nuts to re-attach the changer, on top of the carpet, to the mounting bases (B). Make sure the anti-vibration springs are set to position "90". Attach a bracket (A) bracket to each side of the unit using the machine screws (M4x5). Attach the brackets (A) to the mounting base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers. Stick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. Affix the unit to the floor by pressing in place. Stick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion. Affix the unit to the floor by pressing in place. Quite los pernos hexagonales adhiriendo los soportes (A) a la base de montaje (B) y quite el cambiador de la base (Paso 3 para referencia). Using a knife, cut holes in the carpet directly above the bracket's bolts. Mettez la bande à deux faces fournie en bas des bases de montage (B) et éplucher le support en papier. Use the hexagonal nuts to re-attach the changer, on top of the carpet, to the mounting bases (B). [. . . ] Insert a disc into the tray with the label side up (play surface facing down). Load discs into the remaining 9 trays in a similar manner. NOTE: This unit is not designed to play 3" (8cm) CD-Single discs. Inserting a 3" disc into the magazine, either with or without a 3" disc adaptor, can damage the changer and the disc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JENSEN VOYAGER MCD10
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JENSEN VOYAGER MCD10 will begin.
