User manual JENSEN VOYAGER MCD5112

[. . . ] If you take a few minutes to look through it, you'll learn how to use all of the features of your new JENSEN marine stereo for maximum enjoyment. Before you begin, always disconnect the battery negative terminal. Cover Transport screw holes with supplied clear labels. Push tabs out to secure half-sleeve in the radio opening. [. . . ] Press PWR for more than 3 seconds to store level. DIM/Loudness Pressing LOUD for more than 3 seconds will dim the display. Press LOUD again for more than 3 seconds to restore to normal. After five seconds the display will return to the clock. After five seconds the display will return to the CD display. Press and hold DISP button for three seconds until clock display flashes, then release. Audible Beep Press SEL for three seconds to turn beep on or off. Press AS/PS while a disc is playing and display will shift from track display to show the time remaining on the track. Use a pencil tip (or other non-metallic object) to press the RESET button. Locking screw can be installed if detachable faceplate is not desired. To reinstall, lock faceplate tray into upright position, position right end of faceplate in stereo and press into place on left end of faceplate. Press << or >> for more than three seconds to select manual tuning mode. 5 seconds after any button is pressed "MAN" will expire and revert to SEEK tuning. Seek Tuning Press << or >> for less than one second to seek next station. Automatically Store Stations Select 10 strong stations and store them in the current band. Hold AS/PS button for more than three seconds. The new stations replace stations already stored in that band. Radio pauses for five seconds at each station. Press AS/PS again to stop scanning when desired station is reached. Radio pauses for five seconds at each strong station. [. . . ] Press MEM for more than 3 seconds while in programmed play to clear programming. CD play resumes after button is released. Direct Track Access Select track number by pressing numbered keys (1 ­ 0). For example for track 12 press button 1 and then button 2. [. . . ]