User manual JENSEN VOYAGER MSX60CSS INSTALLATION

[. . . ] Burn up to 1500 MP3 and WMA Files onto a DVD+R / RW · Power Management Charges iPod while Connected Bluetooth ­ Bluetooth hands-free profile for safety / convenience and A2DP profile for streaming music from a PDA / PMP · Compatible with MZ7-TFT Rear Seat Monitors with Touch Screen Interface · Left and Right Double DIN Mounting Brackets Double DIN Half Sleeve Install Bracket Remote Control with Battery Rear Support Mounting Strap iPod Jlink Cable Two Custom Cosmetic Trim Rings Parking Brake Wire MediaLink Box Screen Cleaning Cloth M5x6 and M3x4 Screws to Mount Radio to Brackets Speaker Output Harness Power Input Harness Center Channel Wire Harness You will need these tools and supplies to install your MSX60CSS: · Torx type, flat-head and Philips screwdrivers Wire cutters and strippers Tools to remove existing radio (screwdriver, socket wrench set or other tools) Electrical tape Crimping tool Volt meter/test light Crimp connections 18 gauge wire for power connections 16 ­ 18 gauge speaker wire WARNING!Using an improper fuse may cause damage to the unit and result in a fire. " Before accessing any navigation features, you must purchase and install the NAV101 module. all installation and operating instructions will be included with the NAV101 navigation module. [. . . ] Channel Guide Mode When Channel Guide mode is selected, the first six satellite channels are displayed in the boxes in the bottom left of the TFT screen and the on-screen menu changes to facilitate search mode. SAT channel name SAT channel number SAT band Time Song title Artist name Song category Signal strength indicator Current preset channels/on-screen preset buttons CH -: Select the previous channel CH +: Select the next channel CAT +: Select next channel in current category only While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. To select a channel while in Channel Guide mode, touch the channel name on the screen. The channel will begin playing and the unit will return to the Preset Mode. While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of categories. Use the scroll bar and arrows on the touch screen to view the next/previous six stations in the selected category. Touch the on-screen SCN button to preview each channel in the selected category for 10 seconds. Touch the channel name to play that channel. Touch the on-screen CG button to return to the Preset Mode screen. NOTE: When a VCD is playing with PBC turned "On", activating random playback automatically turns PBC off. To eject a disc, you must first press the OPEN button (1) on the control panel or the OPEN/CLOSE button on the remote control to reveal the disc slot (22). You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected. Use the left/right arrows at the bottom of the image to change the PIP source. To switch to DVD mode when a disc is already inserted, press the SRC button (15) on the front panel or remote control (8) until "DISC" appears at the bottom of the screen. Use the joystick to select a title from the menu or touch the title on screen. You can also select a title using the touch screen. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear. information on the screen , including the media playing and current playback time. [. . . ] Should this occur, the screen will not operate properly until the moisture has evaporated. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmental conditions of the vehicle. Main Amplifier Power Output: 18 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Response: 20 Hz - 20 kHz, -3dB. 4VDC Center Amplifier Power Output: 22 watts RMS X 1 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference. [. . . ]