User manual JENSEN JTA-980

[. . . ] IMPORTANT NOTES Avoid installing unit in locations described below: -Places exposed to heat radiating appliances such as electric heaters -On top of other stereo equipment that radiates too much heat -Places lacking ventilation or dusty places -Humid or moist places Features: -AM/FM Wallmount Stereo with CD Player -Digital Display Type Tuner -Locking Power/Speaker Connector -Clock/Alarm -2-Channel (Left, Right with A/B Speaker Outputs) -Auxiliary input Function -Backlit Controls -Reverse Polarity Protection -50 Watts Power Output -12VDC -Bass/Treble -Preset EQ (Rock, Pop, Classis) -Alarm Defeat Switch REAR PANEL FEATURES -External Fuse Holder -Main Wiring Pigtail with Locking Amp Connector (12-Pin) -Auxiliary Input Phone Jacks (Left and Right) Note: It is characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD readout will return to normal when the temperature increases to a normal range. [. . . ] The LCD readout will return to normal when the temperature increases to a normal range. tUNER 1) Turn power on by pushing the Power switch(10). 2) Use the Band Selector(3) to select either AM or FM 3) Use the Speaker Selector Switch(13) to choose speaker output 4) Use the Tuner Control(8) to select station 5) Adjust Volume Control(14 or 15) to suit taste CD PLAYER 1) Use the Speaker Selector switch (13) to choose between speaker output, headphones or both. 2) Press the CD eject button (7) to eject any CD's that may already be in the player. 3) Press the CD Play/Pause button (the same as the CD Source Select button). 4) You may change tracks by using the Track Up or Track down buttons (19 or20). 3) If there is an external source (example: CD shuttle) connected to the Auxiliary Input Jacks (24) on the rear of the radio, then you can listen to your external source through the system. After the initial 90 day period and for a period of 12 months from the date of the original purchase, the Company will supply at no charge a replacement for any defective part(s). To obtain repair or replacement within the terms of this warranty, the end user should contact the O. Dated bill of sale, and serial number of the unit, and vin#), specification of defect(s), transportation prepaid, to an approved warranty station. This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or to damage to any tapes, cd's, dvd's, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. tHE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE , AND , IN NO EVENT , SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT. This warranty is in lieu of all other express warranties or liabilities. [. . . ] This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. tHE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE , AND , IN NO EVENT , SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT. This warranty is in lieu of all other express warranties or liabilities. [. . . ]