User manual JENSEN LCD TV QUICK REFERENCE GUIDE

[. . . ] When no adjustments have been made for five seconds, the unit will resume normal operation. Press SEL/MENU (6) for more than three seconds to access the menu feature. Once this feature is activated, press SEL/MENU momentarily to step though the available menu options, then press VOL + or VOL - to change the setting for that option, if desired. When no adjustments have been made for five seconds, the unit will resume normal operation. [. . . ] The following options are controlled through the menu feature: Press SEL/MENU for more than three seconds to access the menu feature. When "BEEP ON/ OFF" appears in the display, press VOL + or VOL - to turn the audible beep on or off. When this feature is turned on, the unit will beep each time a button is pressed. Turning off this feature disables the audible beep, and no beep will be heard when pressing buttons. Press SEL/MENU for more than three seconds to access the menu feature. When "BEEP ON/ OFF" appears in the display, press SEL/MENU one time, then press VOL + or VOL - to select the volume level for the unit to assume each time it is turned on. This option allows a selection between USA (200k for FM and 10k for AM) and European (50k for FM and 9k for AM) radio frequency spacing. Press SEL/MENU for more than three seconds to access the menu feature. When "BEEP ON/OFF" appears in the display, press SEL/MENU two times, then press VOL + or VOL - to select USA or European spacing. To store favorite channels for quick access, select the desired channel, then press and hold the desired preset button (1-6) (19) for more than three seconds until the corresponding number appears in the display. While in Sirius satellite radio mode, press SHIFT/SCAN (20a) to select from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the Category or Set Skip Channel modes are selected, the corresponding icon appears in the display. To search the available music categories, press SHIFT/SCAN to access category mode then press CATEGORY (20b) or CATEGORY (20c) to scroll through the available category options. When the desired category is found, search for a specific channel by momentarily pressing CH TUNE - or CH TUNE +. When the desired channel is found, press BAND/ENTER to access the channel. When direct tune mode is accessed, "CH000" will appear in the display with the digit representing the "hundreds" value flashing. Press BAND/ ENTER to access the station, or the unit will search automatically after several seconds. Display the 12-digit Sirius ID number by pressing BAND/ENTER immediately after entering Direct Tune mode (while "CH000" appears in the display). [. . . ] Display the 12-digit Sirius ID number by pressing BAND/ENTER immediately after entering Direct Tune mode (while "CH000" appears in the display). press DISP (22d) to scroll through the display. To resume normal operation, press any button except DISP. When the desired channel is found, press BAND/ENTER to confirm and the "SKIP" icon will flash in the display. [. . . ]