User manual JENSEN VOYAGER AWM960

[. . . ] This button is also used to access the Loudness function; press and hold MUTE to toggle the Loudness function on and off. 3. Liquid Crystal Display (LCD) The liquid crystal display (LCD) panel (3) displays the frequency, time and activated functions. Note: When subjected to cold temperatures for an extended period of time, LCD panels will take longer to illuminate and the display visibility may slightly decrease. Optimal LCD operation will return to normal when the temperature increases to a normal range. Basic Operation 1 2 3 4 5 6 7 8a 8b PUSH ON/OFF VOL AWM960 TUN/TRK DN UP AUD MUTE LOUD INT ENTER AS/PS AM/FM DVD AUX T/F ALARM SET ALARM ON/OFF RPT RDM STOP LANG 1 2 3 4 5 6 MENU DVD/CD/MP3 PLAYER CD-RW MP 3 SPEAKER A SPEAKER B SPEAKER C JENSEN AUX A/V IN 9 5 4. [. . . ] Tuning Manual Tuning Briefly rotate the TUN/TRK (11) knob to tune the frequency one step higher or lower. Seek Tuning Rotate and hold the TUN/TRK knob to automatically tune up or down to the next strong station. Tuner Operation 10 11 PUSH ON/OFF VOL AWM960 TUN/TRK DN UP AUD MUTE LOUD INT ENTER AS/PS AM/FM DVD AUX T/F ALARM SET ALARM ON/OFF RPT RDM STOP LANG 1 2 3 4 5 6 MENU DVD/CD/MP3 PLAYER CD-RW MP 3 SPEAKER A SPEAKER B SPEAKER C JENSEN AUX A/V IN 13 12 7 12. Preset Stations Store Preset Stations Six numbered preset buttons (12) store and recall stations for each AM and FM band. To store a station, select a band (if needed), then select a station. The current station will be stored, and the corresponding preset number will appear in the display. Recall Preset Stations To recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to the corresponding stored station. 13. Automatically Store / Preset Scan (AS/PS) Automatically Store Press AS/PS (13) for more than three seconds, and the unit will automatically scan for and store the six strongest stations in the current band. To stop this function before the automatic storing is complete, briefly press AS/PS again. Preset Scan Briefly press AS/PS to scan all preset stations in the current band. The unit will play each station for five seconds before moving on to the next station. To stop this function before the scan is complete, briefly press AS/PS again. 8 AWM960 CD Operation 14. Insert and Eject CD Insert CD Insert a CD label-side up into the CD slot (14a), and the disc will begin to play. Eject CD Press the eject button (14b) to stop CD play and eject the CD. 15. Pause Press the play/pause button (15) to suspend and resume disc play. 16. Track Select Briefly rotate the TUN/TRK knob (16) o advance to the next or previous track on the CD. The selected track number will appear on the display. Rotate the TUN/TRK knob for more than three seconds to fast forward or fast reverse through the disc. CD play starts when the play/pause button is pressed. CD & DVD Operation 22 20 23 21 16 PUSH ON/OFF VOL AWM960 TUN/TRK DN UP AUD MUTE LOUD INT ENTER AS/PS AM/FM DVD AUX T/F ALARM SET ALARM ON/OFF RPT RDM STOP LANG 1 2 3 4 5 6 MENU DVD/CD/MP3 PLAYER CD-RW MP 3 SPEAKER A SPEAKER B SPEAKER C JENSEN AUX A/V IN 15 17 18 19 14a 14b 9 17. Intro Scan (INT) Press and hold INT(17) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. Press INT again to end the scan and play the selected track. 18. Repeat (RPT) Press and hold RPT (18) for more than three seconds during disc play to continuously repeat the selected track. Press and hold RPT again to stop repeating. 19. Random Shuffle (RDM) Press and hold RDM (19) for more than three seconds during disc play to play all tracks on a CD in random, shuffled order. [. . . ] 75 Watts Total (25 Watts per Channel) Output Wiring . 2/6 Speaker and Headphone System Output Impedance . Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum Total system power . 75 Watts Maximum DVD Frequency Response . [. . . ]