User manual JENSEN VOYAGER AWM970

[. . . ] We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen receiver for maximum enjoyment. You will need these tools and supplies to install your AWM970: · Philips screwdriver Wire cutters and strippers Tools to remove existing radio (screwdriver, socket wrench set or other tools) Electrical tape Crimping tool Volt meter/test light Crimp connections 16 gauge wire for power connections 16 ­ 18 gauge speaker wire To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the AWM970 is to be installed in a vehicle equipped with an on-board drive or navigation computer, do not disconnect the battery cable. [. . . ] Press 4/RDM (19) during disc play to play all tracks on a CD in random, shuffled order. Rotate the TUN/TRK control (12) to advance to the next or previous track on the CD. the selected track number will appear on the display. Rotate the TUN/TRK control for more than three seconds to fast forward or fast reverse through the disc. CD play starts when the play/pause button is pressed. Rotate the TUN/TRK control for more than three seconds or press the >> or << buttons on the remote control (17) to fast forward or fast reverse. Use the number buttons on the remote control to enter a track number in each field. Press the >/|| button (19) on the remote control or highlight "PLAY" on screen and then press the ENTER button (5) to begin playback in the numbered order indicated. To select a track directly, use the number pad on the remote control (10). for single digit entries , press the corresponding number. For two digit entries, press the 10+ button followed by the last digit (i. Use the GOTO function to access a track (chapter) directly. The On Screen Display information will appear with the track number highlighted. Use the number keys on the remote control to enter the 3-digit track number directly (i. The following information is displayed at the top of the screen during CD playback: ­ "X" indicates repeat play is OFF, "1" indicates repeat track, and "A" indicates repeat disc. Press the button on the remote control (27) repeatedly to view the following information for elapsed/remaining playing time: · 00:02:18 ­ total elapsed playing time for disc C ­00 :34 :37 ­ remaining playing time T 00:02:18 ­ total elapsed playing time for current track C ­00 :34 :37 ­ remaining playing time for current track Press the MENU button (6) on the remote control to turn Playback Control on/off when this feature is available on your VCD. Rotate the TUN/TRK control (12) to advance to the next or previous track on the disc. Use the number buttons on the remote control to enter a track number in each field. Press the >/|| button (19) on the remote control or highlight "PLAY" on screen and then press the ENTER button (5) to begin playback in the numbered order indicated. The following remote control features, along with many others, are available during DVD playback (see "Remote Control Operation" on page 15 for complete functionality): · LANG: Press to choose an alternate audio language, if available. ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM 1/3 or ZOOM 1/4, or select OFF to return to normal view. Rotate the TUN/TRK control for more than three seconds or press the >> or << buttons on the Press the 3/RPT button (18) on the control panel or the RPT button (21) on the remote control multiple times during playback to select from the following repeat play options: · During DVD and VCD playback, press the button (27) on the remote control to display playback information on the screen, including the media playing and current playback time. [. . . ] Enter track number to access track directly. For track number > 10, use 10+ followed by second digit. Enter track number to access track directly. For track number > 10, use 10+ followed by second digit. [. . . ]