User manual JENSEN VOYAGER JHD2000

[. . . ] Pressing the AUD button accesses the desired function, whose setting is adjusted using the VOL ¢Ú control. Pressing the button will first display the bass adjustment (BAS:on the display panel), then treble adjustment (TRE: will appear on the display), balance (BAL:), fader(FAD:) and then volume (VOL:). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. BASS CONTROL Select the Bass mode by pressing the AUD button ¢Û so the BASS:indication -1- -2- OPERATING INSTRUCTIONS appears on the display panel. Within 5 seconds of choosing, turn the control counter clockwise to decrease the bass response or clockwise to increase it as desired. The level will be shown on the display panel from a minimum of BAS: -7 to a maximum of BAS: +7 (0 indicates flat response). [. . . ] When a reasonably strong station is detected, the station frequency is displayed for 5 seconds. If no other button is pressed within this time frame, the scan operation resumes and stops at the next available station. This operation will continue until the SCAN button is pressed again to halt the scan mode. 15 . WEATHER BAND (WB) BUTTON The radio provides access to the weather band for local weather information. Press the WB button to switch the radio from AM/FM reception to the weather band. Pressing the TUNE + or - button for more than 2s will search the weather band for the strongest signal. Pressing the TUNE + or TUNE - button will now access weather channels up or down. When the WB button is pressed again, radio operation returns to the previous FM or AM station, and WB1-7 disappears from the display. It is normal to receive only one station in a given locale due to the design of the Weather radio system. 16 . CASSETTE DOOR Hold the cassette with the exposed tape edge to the right and insert into the cassette door. Depress fully until the cassette is engaged and begins playing. TAPE and the tape directional arrow will appear on the display. When the cassette reaches the end on the side of the tape being played, the unit will automatically change direction of play as shown by the arrows on the display panel and play the other side of the cassette. NOTE: observe cassette operation cautions in the care and maintenance section of this manual 17 . FAST-FORWARD BUTTON( ) pushing the fast-forward button will cause the tape to move rapidly in the forward direction of play; FAST will appear on the display panel. To stop fastforward movement, lightly push the rewind button until the fast-forward button disengages; FAST will disappear from the display panel 18 . REWIND BUTTON( ) Pushing the rewind button will cause the tape to move rapidly in the reverse OPERATING INSTRUCTIONS direction of play; FAST will appear on the display panel. To stop rewind movement, lightly push the fast- forward button until the rewind button disengages; FAST will disappear from the display panel 19 . PROGRAM SELECTOR(PROG) To manually reverse tape direction and play the other side of the cassette, lightly push both the fast-forward and rewind buttons at the same time. The change of direction will be shown by the arrows on the display panel. 20 . EJECT BUTTON() Tape playback is stopped and the cassette is ejected by pressing this button, which also has the function of switching over to radio operation. NOTE: Do not leave a cassette engaged in the player when not in use. Doing so can cause damage to the cassette and/or mechanism of the unit. Always press the eject button and remove the cassette when leaving the vehicle 21 . TIME/FREQUENCY SELECTOR(T/F) During radio operation, press this button to call the frequency display on the quartz clock. [. . . ] THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TOTHE REPAIR OR REPLACEMENT PROVIDED ABOVE, AND IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT. This warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TOTHE DURATION OF THIS WARRANTY. ANY ACTION FOR BREECH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 DAYS FROM THE DATE OF ORIGINAL PURCHASE. [. . . ]