User manual JENSEN VOYAGER JXHD35 INSTALLATION

[. . . ] Please read this manual thoroughly prior to operating the player and retain it for future reference. Precautions EXPLANATION OF GRAPHIC SYMBOLS The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RICK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS PRODUCTION TO RAIN OR MOISTURE. 1 SAFETY PRECAUTION For safety reasons, when changing video media, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat-belts to change video media or make any adjustments to the system. [. . . ] The contents of the menu vary from disc to disc. Press MENU during playing to display the menu, and press ENTER or PLAY to start playing. Some DVDs only allow you to select disc playback options using the DVD menu. DISPLAY (Display contents vary from disc to disc. ) 1) PLAYING TIME AND REMAINING TIME a. During playback press `DISPLAY' to display the current Title Number (1), the total Number of Titles (2), the current Chapter Number (3), the total Number of Chapters (4), and the Playing Time for the title (5). The heading will disappear automatically after 3 seconds if no buttons are pressed. Title, Chapter Number, and Time Screen Display b. Press `DISPLAY' again to display the Remaining Time of the title. The heading will disappear automatically in about 3 seconds. Title Remaining Time Screen Display 10 c. Press `DISPLAY' the 3rd time to display the Elapsed Time for the chapter. The heading will disappear automatically in about 3 seconds. Chapter Elapsed Time Screen Display d. Press `DISPLAY' the 4th time to display the Remaining Time for the chapter. PLAYING AUDIO CDS When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track and the amount of the time for that track playing, the total amount of time on the disc and the current time running on the disc. Press the DISPLAY button on the remote to display the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. During playback press `DISPLAY' once and SINGLE ELAPSED will appear along with the current track playing and the time of that track. SINGLE ELAPSED Screen Display b. Press 'DISPLAY' twice and SINGLE REMAIN appears along with the current track playing the and the amount of time left. SINGLE REMAIN Screen Display 16 c. Press `DISPLAY' three times and TOTAL ELAPSED appears along with the current track playing and the total time that the CD has been playing. TOTAL ELAPSED Screen Display d. Press `DISPLAY' four times and TOTAL REMAIN appears along with the current track playing and the amount of time remaining on the CD. TOTAL REMAIN Screen Display e. Press `DISPLAY' a fifth time and "DISPLAY OFF" will appear momentarily then disappear. The CD time Information will not be displayed. 1) USING THE REPEAT FEATURE The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options: · REP-ONE- repeats the track that is playing. [. . . ] Press `ENTER' to enter the Password Verify Page. 24 PASSWORD VERIFY Input Screen Display Enter a 4 digit password, then press `ENTER' to confirm the parental level setting. NOTE: For 1st time use, the default password is 3308. Select `PASSWORD' using UP/DOWN, and then press RIGHT to enter the submenu. PASSWORD CHANGE Screen Display Press `ENTER' to enter the Password Change Page. Input the Old Password or the Default Password, the New Password, and the Confirmed New Password. [. . . ]