User manual JENSEN VOYAGER LCD TVS QUICK REFERENCE GUIDE

[. . . ] Audio Adjustment Press AUD (4) momentarily to step through the following audio adjustment options: Volume, Bass, Treble, Balance (left to right) and Speaker (A to B) and Fader (front to back). When the desired option appears in the display, rotate the volume control knob (1) to adjust that audio feature. When no adjustments have been made for three seconds, the unit will resume normal operation. Basic Operation 3 7a 7b 6 COMPACT DISC PLAYER 8b 8a 1 2 RPT 3 SCAN PUSH RDM 4 5 H 6 M PUSH PWR VOL ALARM 1 10 SET ON/OFF EQ T/F AUD RADIO CD COMPACT MUSIC SYSTEM 2 5 AUX IN MUTE AUX BAND CD SPK A SPK B SPK A+B JENSEN AWM910 9 4 6 AWM910 5. Auxiliary Input Function Press AUX (5) to directly access auxiliary input mode from any other function mode when portable audio device is connected to the unit. [. . . ] To connect a portable audio device, insert a standard 3. 5 mm (audio line output or headphone output from your portable CD / MP3 / iPod or other media player) into an "AUX IN" jack on the front or rear of the unit. Note: For front panel AUX input, and external audio source such as an audio (MP3) player can be connected to the front panel AUX input with a separately purchased 3. 5mm cable adapter. Connect the device to the AUX input on the front panel and press AUX to engage the input circuit. 6. Time/Frequency Display Press T/F (6) momentarily to display the time while in Tuner, CD or auxiliary input mode. 7. Setting the Clock Press T/F (6) to display the clock. Press and hold T/F, and the clock display will flash. While holding T/F, press H (7a) to adjust the hour or M (7b) to adjust the minute. The new time will be saved five seconds after the last adjustment is made. 8. Setting the Alarm To set the alarm to a specific time, press and hold ALARM SET (8a), and the alarm time will flash in the display. While holding ALARM SET, press H (7a) to adjust the hour or M (7b) to adjust the minute. The new alarm time will be saved five seconds after the last adjustment is made. Once a time is set, press ALARM ON/OFF (8b) to turn the alarm function on or off. 9. Pause Press the play/pause button (18) to suspend and resume disc play. 19. Track Select Briefly press the tune up (19a) or tune down (19b) button to move to the next or previous track. Press and hold the tune up or tune down button to fast forward or fast reverse through the current track. Fast forward and fast reverse will stop when the button is released. 20. Repeat (RPT) Press RPT (20) during disc play to continuously repeat the selected track. Press RPT again to stop repeating. 21. Intro Scan (SCAN) Press INT(21) during disc play to play the first 10 seconds of each track on the current disc. Press INT again to end the scan and play the selected track. 22. Random Shuffle (RDM) Press RDM (22) during disc play to play all tracks on a CD in random, shuffled order. Press RDM again to stop random play. 10 AWM910 CD Operation 19b 19a 16 20 21 22 COMPACT DISC PLAYER PUSH 18 1 2 RPT 3 SCAN RDM 4 5 H 6 M PUSH PWR VOL ALARM SET ON/OFF EQ T/F AUD RADIO CD COMPACT MUSIC SYSTEM 17 AUX IN MUTE AUX BAND CD SPK A SPK B SPK A+B JENSEN AWM910 11 Specifications General Power Supply Requirements. DC 12 Volts, Negative Ground Operating Voltage . [. . . ] Press RDM again to stop random play. 10 AWM910 CD Operation 19b 19a 16 20 21 22 COMPACT DISC PLAYER PUSH 18 1 2 RPT 3 SCAN RDM 4 5 H 6 M PUSH PWR VOL ALARM SET ON/OFF EQ T/F AUD RADIO CD COMPACT MUSIC SYSTEM 17 AUX IN MUTE AUX BAND CD SPK A SPK B SPK A+B JENSEN AWM910 11 Specifications General Power Supply Requirements. DC 12 Volts, Negative Ground Operating Voltage . 10-7/16"(W) x 7"(H) x 6-1/4"(D) Mounting Dimensions . 9-3/8"(W) x 6-1/8"(H) x 6-1/4"(D) Weight . [. . . ]