Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JENSEN VOYAGER MCD4030. We hope that this JENSEN VOYAGER MCD4030 user guide will be useful to you.
Lastmanuals help download the user guide JENSEN VOYAGER MCD4030.
Manual abstract: user guide JENSEN VOYAGER MCD4030
Detailed instructions for use are in the User's Guide.
[. . . ] Before you begin, turn off the vehicle ignition and disconnect the battery negative terminal. Remove the two screws from the top of the unit, and seal the holes with the plastic film provided to ensure that no water is able to enter the unit. Remove outer trim ring, and insert the supplied removal keys as far as they will go (notches facing up) into the slots at the middle left 2 and right sides of the unit. [. . . ] Press SEL/MENU for more than three seconds to access the menu feature. When "BEEP ON/ OFF" appears in the display, press SEL/MENU one time, then press VOL or VOL to select the volume level for the unit to assume each time it is turned on. This option allows a selection between USA (200k for FM and 10k for AM) and European (50k for FM and 9k for AM) radio frequency spacing. Press SEL/MENU for more than three seconds to access the menu feature. When "BEEP ON/OFF" appears in the display, press SEL/MENU two times, then press VOL or VOL to select USA or European spacing. Press and hold SEL/MENU for more than three seconds, then press SEL/MENU five times until "FRE/TIME/NO PRI" appears in the display. Pressing DISP will momentarily display the clock, and the unit will return to frequency display after several seconds. Pressing DISP will momentarily display the radio frequency, and the unit will return to the clock display after several seconds. ⷠNo Priority: Pressing DISP will switch the unit from displaying the time to displaying the clock (or vice versa) until DISP is pressed again. Press BAND/LOUD (7) for more than three seconds to reinforce the bass output. Press BAND again for more than three seconds to release this function. Use a ballpoint pen or other thin metal object to press the reset button (9) under the following circumstances: · If none of the function buttons work or if an error symbol appears in the display. Press BAND (10) to change between three FM bands and two AM bands. Press << (11a) or >> (11b) momentarily, and the unit will automatically tune to the next strong station. Press << or >> for more than three seconds to enter manual tuning mode. When "MANUAL" appears on the display, press << or >> to move the radio frequency up or down one step. [. . . ] refer to the manual for the CD-R/CD-RW recorder or software for information on the finalization process. Depending on the recording status, recording equipment and disc conditions, some CD-R and CD-RW discs may not play on this unit. For optimal performance, use CD-R discs with speeds 1x to 8x with write speed 1x to 2x. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JENSEN VOYAGER MCD4030
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JENSEN VOYAGER MCD4030 will begin.
