User manual JENSEN VOYAGER MCD6115

[. . . ] Cut and remove the part of the dashboard covered by the hatched area on the mounting paper. Use the double-sided tape (supplied) to attach the two mounting brackets to the BACK of the dashboard. Make sure the screw holes on the bracket line up with the holes in the dashboard. [. . . ] When the wires are reconnected, these settings will automatically be recalled. To activate manual tuning, press << (10) or >> (11) for more than three seconds until "MAN" appears in the display. press and hold << or >> to quickly advance to the desired frequency. Five seconds after any button is pressed, manual tuning will expire and revert to seek tuning. The radio pauses for five seconds at each strong station. The radio pauses for five seconds at each station. Press AS/PS again to stop scanning when the desired station is reached. Press << (10) or >> (11) for less than one second to automatically seek the next strong station. To automatically program the six strongest stations in the current frequency, press and hold the AS/PS button for more than three seconds. The new stations replace stations already stored in the preset numbers for that band. NOAA Weather Radio broadcasts National Weather Service warnings, watches, forecasts and other hazard information 24 hours a day. Press the BAND button and the >> (11) button simultaneously again to change the Frequency back to U. Use preset buttons 1-7 (12-18) or the << (10) and >> (11) buttons to select the corresponding weather channel. Do not expose CD player to extremely high or low temperatures. Do not drive with ejected CD in the slot. The unit does not have to be on to eject a CD. Intro (Preview all Tracks) Press 6 INT for more than three seconds to play first ten seconds of each track on current CD. "INT" appears in the display. [. . . ] Skip Tracks, Direct Track Access, Fast Forward and Fast Reverse, Pause, Repeat, Random and Intro Scan functions can be performed on CDs played through the CD Changer. La alimentación no va a la unidad Ninguno de los altoparlantes funciona (las luces del visualizador funcionan) No todos los altoparlantes funcionan Does not operate (display No power to yellow wire does not light) No power to red wire Inline fuse blown No power to unit No speakers operate Inline fuse blown Speaker harness not connected Incorrect splices or connections Speaker wires shorting to Check splices and chassis ground or to each connections. Other Blows fuses Power wire shorting to ground Make sure wire is not pinched. [. . . ]