User manual JENSEN VOYAGER MDV6115

[. . . ] It's a good idea to read all of the instructions before beginning the installation. We've tried to make the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all of the features of your new Jensen Marine stereo for maximum enjoyment. Torx type, flat-head and Phillips screwdrivers Wire cutters and strippers Tools to remove existing radio (screwdriver, socket wrench set or other tools) Electrical tape Crimping tool Volt meter/test light Crimp connections 18 gauge wire for power connections 16 ­ 18 gauge speaker wire Speaker Requirements: Only connect speakers rated in the load impedance of 4 ohms. [. . . ] The unit will pause for several seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. The unit will play each station for several seconds. The unit has a seven-channel NOAA Weather Radio receiver that broadcasts National Weather Service warnings, watches, forecasts and other hazard information 24 hours a day. After accessing the weather band, momentarily press << or >> to move to the next or previous of the seven available channels. Pull open the CD slot cover (18a), and insert a CD label-side up into the CD slot. Close the cover, and the disc will load and begin play. If the CD is not removed after several seconds, the unit will reload the disc for safe keeping. Close the cover to begin play, or press EJECT (18b) to eject and remove the disc. Press << (20a) or >> (20b) momentarily to advance to the next or previous track on the CD. the selected track number will appear on the display. Press and hold << or >> to fast forward or fast reverse through the disc. CD play resumes when the button is released. Access tracks one through nine directly using the numbered buttons (21) on the bottom of the unit (0-9). Use the program function to select up to 32 tracks to play in any order; select a track number for each spot in the playing sequence. Note: A disc must be playing in order to access the program function. Press MEM (22a) for several seconds to enter program mode. "PGM" will flash on the display , then "P-01" will appear. Press to select the track desired for that spot in the playing sequence. When the desired track is accessed, press MEM to confirm. Once all desired tracks have been programmed into the playing sequence, press and hold PGM (22b) for several seconds to play the CD in the programmed order. to stop programmed play , press and hold PGM again. [. . . ] Press MENU to enter the setup menu and set your preferences for DVD play. To navigate all DVD menus, use the up and down arrows (32a and 32b) and/or the right and left arrows (32c and 32d) to select the desired menu option, and press OK to confirm the selection. If this option is selected while using a 16:9 TV, the left and right edges will be cut off. If this option is selected while using a wide screen TV, black bands will appear at the top and bottom of the screen. [. . . ]