User manual JENSEN VOYAGER VOM-783T

[. . . ] This unit is designed to NOT allow video while driving. Park your car in a safe place and engage the parking brake before watching video. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. [. . . ] use the rotary encoder (4) to adjust the settings for a selected function. The display will return to the normal indication 5 seconds after the last adjustment or when another function is activated. Angle Turn the rotary encoder to adjust the angle of the front panel upward by choosing a setting from "00" to "12". contrast Turn the rotary encoder to adjust the screen contrast from "00" to "50". Bright Turn the rotary encoder to adjust the screen brightness from "00" to "50". Press the rotary encoder (4) to confirm each entry and move to the next field. Use the rotary encoder to change the source to "OUT", allowing you to output the audio/video source from the built-in DVD player to another device. tuner Set (Local/Distant) Turn the rotary encoder to choose "Local" or Distance". Local mode favors access to local stations whose signals are much stronger. Tuner Area Turn the rotary encoder to choose the appropriate frequency spacing for your area: U. Beep Tone Turn the rotary encoder to choose whether and audible beep is heard when a function is selected: "BEEP ON" or "BEEP OFF". each band stores up to six preset stations. Remaining five presets on the current band and for presets on the other four bands. Press the AS/PS button (15) to scan and play each preset station for 5 seconds each. Press the tune/track |||< button (18) to manually tune the radio station higher or press the tune/ track >||| button (19) to tune the radio station lower. Press and hold the AS/PS button (15) to select six strong stations and store them in the current band using the AUTO PRESET feature. The radio will automatically scan the current band and enter strong stations into the preset memory positions. When using the AUTO PRESET feature, the new stations replace any stations already stored in preset memory. NOTE: You can stop the AUTO PRESET function at any time by pressing the AS/PS button again. the unit will revert to Tuner operation. If the disc is not removed from the unit within 15 seconds, the disc will be reloaded. NOTE: To prevent a disc from accidentally being damaged, always remove the disc from the unit when disc play is finished. [. . . ] When not using the disc player, always remove the compact disc. Do not leave an ejected disc sitting in the disc slot as this can expose it to sunlight and other causes of damage. Do not attempt to open the unit chassis. There are no user-serviceable parts or adjustment points inside. [. . . ]