User manual JENSEN VOYAGER VOM-7SN

[. . . ] Use the UP and DOWN buttons to highlight an individual TIMER option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit. 12 6 Picture Sound Timer Setup Lock Channel Sleep Timer Time Zone Daylight Saving Time Clock Off Pacific Off 2007 10 31 04 04PM Select Move MENU Exit The TIMER menu includes the following options : Sleep Timer Allows you to set up the sleep timer : 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min and off. Allows you to select correct time zone: Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Allows you to turn on or off the daylight saving time. Time Zone Daylight Saving Time 25 Application Customizing the SETUP Settings Select TV source for example. (Press SOURCE button to select TV mode) 1. [. . . ] Press the POWER button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the LEFT or RIGHT button to select the SETUP. Use the UP and DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit. 12 6 Picture Sound Timer Setup Lock Channel Menu Language Transparency Zoom Mode Noise Reduction Advance Close Capation Audio Only Restore Default English Off Normal Off Select Move MENU Exit The SETUP menu includes the following options: Menu Language Transparency Zoom Mode Noise Reduction Advance Allows you to select menu languages: English, Français and Español. Allows you turn on or off the transparency function. Allows you to select the zoom modes: Normal, Cinema, Wide and Zoom. Allows you to select the noise reduction modes: Strong, Off, Weak, Middle. Input PC signal first, then press SOURCE button to select VGA mode, press RIGHT button to confirm. 12 6 Picture Sound Timer Setup Lock Channel H Pos V Pos Clock Phase Auto 50 50 50 0 Select Move MENU Exit H-Position V-Position Clock Phase Auto Allows you to use LEFT and RIGHT button to adjust the H Position. Allows you to use LEFT and RIGHT button to adjust the V Position. Select "Auto" and press RIGHT, the unit will automatically adjust all items to achieve a best effect. 26 Application Customizing the SETUP Settings Close Caption Use Down button to highlight the Close Caption item, then press RIGHT button to enter into the following menu. 12 6 Picture Sound Timer Setup Lock Channel CC Mode Basic Selection Advanced Selection Option On CC1 Service1 Select Move MENU Exit CC Mode Allows you to select the CC Modes: On, Off and CC on Mute. Allows you to select the basic selections: CC1, CC2, CC3, CC4, Text1, Text2, Text3 and Text4. Basic Selection Advanced Selection Allows you to select the advanced selections: Service1, Service2, Service3 Service4, Service 5 and Service 6. Press the power button of the remote control. This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. But if the screen does not come after 1 minute contact your dealer or an authorized service center. Perform brightness adjustment or Contrast adjustment. Stop using wireless telephones, hair driers and electric drills. Check if the Pause button is pressed on external equipment. Increase the sound level by pressing volume adjustment button. Check if sound terminal of external input is connected properly. Check if audio cables are connected properly. If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center. The screen appears too slowly after the power is turned on. Screen is too bright or too dark. [. . . ] If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center. The screen appears too slowly after the power is turned on. Screen is too bright or too dark. Stripes appear on the screen and it shakes. The screen does not move. Screen appears, Voice is not heard Remote control does not work 1. Check that the batteries of the remote controller were loaded properly. [. . . ]