User manual JETWAY 531CF-6

[. . . ] 531CF USER'S MANUAL 3D AGP VGA / 3D Audio M/B FOR Pentium processor The author assumes no responsibility for any errors or omissions which may appear in this document nor does it make a commitment to update the information contained herein. NO. G03-531CFR6A Release date: SEP 2000 ** Year 2000 compliant ** Trademark: *Pentium is registered trademark and MMX is a trademark of Intel corporation, the other names and brands are the property of their respective owners. *Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT Chapter 1 1-1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2 Orerview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3 Key Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2 Hardware lnstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Hot Key Function As : Select Enabled if your system has a hot key for soft power off. The choice: Power off, Suspend , Disabled. V/H SYNC+Blank · · · · · 20 · PM Timers : The following four modes are Green PC power saving functions which are only user configurable when User Defined Power Management has been selected. · HDD Off After : By default, this item is Disabled, meaning that no matter the mode the rest of the system, the hard drive will remain ready. Otherwise, you have a range of choices from 1 to 15 minutes or Suspend. This means that you can elect to have your hard disk drive be turned off after a selected number of minutes or when the rest of the system goes into a Suspend mode. · Doze Mode : When enabled and after the set time of system inactivity, the CPU clock will run at slower speed while all other devices still operate at full speed. · Standby Mode : When enabled and after the set time of system inactivity, the fixed disk drive and the video would be shut off while all other devices still operate at full speed. · Suspend Mode : When enabled and after the set time of system inactivity, all devices except the CPU will be shut off. · PM Events : You may disable activity monitoring of some common I/O events and interrupt requests so they do not wake up the system. The default wake-up event is keyboard activity. · HDD Ports Activity : When set to On (default), any event occurring at a HDD (serial) port will awaken a system which has been powered down. · COM Ports Activity : When set to On (default), any event occurring at a hard or floppy drive port will awaken a system which has been powered down. · LPT Ports Activity : When set to On (default), any event occurring at a LPT (printer) port will awaken a system which has been powered down. · VGA Activity : When set to On (default), any event occurring at VGA will awaken a system which has been powered down. The following is a list of IRQ's, Interrupt ReQuests, which can be exempted much as the COM ports and LPT ports above can. When an I/O device wants to gain the attention of the operating system, it signals this by causing an IRQ to occur. When the operating system is ready to respond to the request, it interrupts itself and performs the service. When set On, activity will neither prevent the system from going into a power management mode nor awaken it. · IRQ [ 3-7, 9-15], NMI · IRQ 8 Break Suspend : You can Enable or Disable monitoring of IRQ8 (the Real Time Clock) so it does not awaken the system from Suspend mode. Power Button Over Ride : You could press the power button for more than 4 seconds forces the system to enter the Soft-Off state when the system has "hung. " The choice: Instant-Off, Delay 4 Sec. Ring Power Up Control : When you select Enabled, a signal from ring returns the system to Full On state. [. . . ] · FM: Controls the FM music playback or the recording level. · Aux-in: Controls the Aux-in music play or the recording level. · PC-SPK: Controls the external PC speaker input level. · CX: Controls the CD drive output level, for CD drives configured to play their audio output through the PC's audio hardware. [. . . ]