User manual JONSERED LM 2155 MD

[. . . ] Before carrying out any operations on the cutting tool, disconnect the plug Manufacturer Model Product number Maintenance lever Serial number Type Engine info Weight Sound power level Stop the blade if the lawnmower has to be tilted for transportation when cross ing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed. Never operate the lawnmower with defective guards, or without safety de vic es, for example defl ectors and/or grass catchers, in place. Do not change the engine governor settings or overspeed the engine. Operating the engine at excessive speed may increase the hazard of personal injury. [. . . ] Be familiar with the controls and the proper use of the equipment. Never allow children or people un familiar with the instructions to use the lawnmower. Local regulations may restrict the age of the operator. Never mow while people, especially children, or pets are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. Do not operate the equipment when barefoot or wearing open sandals. Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine. - Store fuel in containers specifically de signed for this purpose. - Refuel outdoors only and do not smoke while refueling. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot. - If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dissipated. Hold the engine start-grip (11) and pull the starter rope gently until you feel the resistance caused by compression. Return the starter rope slowly then pull the handle firmly towards you to its full extent. ELECTRICAL STARTING: (While holding the engine stop lever (14)). insert the plug (G) in the socket (H) on the engine. CAUTION: The blade starts turning as soon as the engine is started. Keep the engine stop lever (14) depressed during machine operation. When the lever is released, the engine stops. MOWING To cut the grass, push the lawn mower manually or insert the automatic advance gear. CAUTION: Engage the gear only when the engine is running. Important: If, when you press the clutch lever, the automatic advance gear does not engage, the clutch cable should be adjusted by inserting the spring (P) in one of the subsequent holes in the plate (R) or in the hole "S" . Switch off the motor and disconnect the spark plug before undertaking any maintenance work. [. . . ] C) The fault is not caused by misuse, neglect or faulty adjustment by the user. D) The failure has not occurred through fair wear and tear. E) The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products. F) The machine has not been used for hire. [. . . ]