User manual JRC JMA-5200MK2 BROCHURE

[. . . ] JMA-5200Mk2 series ­ dimensions and weights Dimension drawings - Display1 NWZ-164 Weight 5 kg JMA-5200Mk2 series ­ specifications Model IMO compliant Display Range scale Scanners Model Antenna length Transmitting power Transmitting frequency Beam width 3db Rotation speed Pulse width (receive freq. ) JMA-5212-4 JMA-5212-6 JMA-5222-7 JMA-5222-9 JMA-5212-4HS JMA-5212-6HS colour raster scan PPI 0. 125/0. 25/0. 5/0. 75/1. 5/3/6/12/24/48/96 NM NKE-2254-9 NKE-2103-4HS NKE-2103-6HS 9ft. 20° 27rpm 24rpm 48rpm 0. 08µs/2250Hz, 0. 07µs & 0. 2µs/2250Hz, 0. 08µs/2250Hz, 0. 25µs/1700Hz, 0. 4µs/1400Hz, 0. 25µs/1700Hz, 0. 5µs/1200Hz, 0. 8µs/750Hz, 0. 5µs/1200Hz, 0. 8µs/750Hz, 1. 0µs/650Hz, 0. 8µs/750Hz, 1. 0µs/650Hz 1. 2µs/510Hz 1. 0µs/650Hz circular + diode limiter automatic / manual temperature -25° to 55°C, relative humidity 0% to 93% non-condensing NDC-1460 north-up / course-up / head-up RM display with true trail, RM display with relative trail, TM display 2 (EBL1/EBL2) (center/independent) 000. 0° - 359. 9°, digital display 2 (VRM1/VRM2), 0. 000 - 97. 7 NM, digital display 4 stages: short, middle, long, super long (e. g. [. . . ] Optional TT (Target Tracking) function module with up to 30 targets, and or AIS interface, plotter control unit can be built in. ConstaviewTM The second generation and patented ConstaviewTM is realised through the use of three high-speed processors (in-house TornadoTM technology). All info gathered by the radar is fully processed within a few milliseconds before displayed, generating a smooth image rotation when sailing in Head-Up mode. When changing to North-Up, the new radar image is displayed without any delay caused by the scanner rotation. Wide dynamic range receiver Saturation of noises on receiver Wide dynamic range The new JMA-5200Mk2 series integrates a wide dynamic range receiver that, compared to conventional models, significantly improves the differentiation of noise and targets under sea clutter. The radar system overcomes different sources of unwanted signals, maintaining a constant level of clutter suppression. Clear on-screen info The JMA-5200Mk2 series make your radar images more brilliant than ever with a sharp 15-inch high resolution LCD screen. Menu selections, via the keyboard or trackball are clearly shown on the display - allowing "at a glance" interpretation of the radar image. You can also select day and night background modes and adjust the brilliance at your own convenience. Sensor info Cursor/marker info Own ship info Target tracking & AIS info Menu and digital info Alarm info More powerful than ever Inside the JMA-5200Mk2 are three TornadoTM processors, which are exclusively developed and designed by JRC, bringing a new level of performance and reliability to radar operation. The new TornadoTM processors, which equal the power of twelve conventional processors, and advanced system architecture make the JMA-5200Mk2 series probably the most sophisticated radar available today. Real time Head-Up mode ConstaviewTM Conventional Radar sweep Redrawing CCRP As set by IMO regulations, a Consistent Common Reference Point (CCRP) is a location on own ship, to which all horizontal measurements, such as target range, bearing, relative course/speed, closest point of approach, or time to closest point of approach are referenced. Where multiple antennas are installed, different position offsets for each antenna in the radar system should be applied with respect to the CCRP. If you switch between scanners (up to 8 possible - option), the information displayed is generated allows for consistency and uniform output. This new feature is easily accessible from the menu. True Trails ConstaviewTM refreshes the image every 16mS. Despite heading changes trails are always true. Relative Trails Traditional technology relies on several sweeps of the scanner to redraw the image. Trails are presented as relative. Select a trail length Other ship's movement and speed can be monitored from length and direction of their trails, primary serving for collision avoidance. [. . . ] Display to processor1 Keyboard to processor Scanner to processor2 Power cable for processor Power cable for display 1 2 Abidjan Columbo Kuala Lumpur Singapore Jakarta Suva JRC one-callTM One number to call With JRC you can go anywhere and if you need our support, simply call us at +81 3 3492 9201, anytime. Lima Rio de Janeiro Buenos Aires Talchuano Cape Town Richards Bay Durban Std. 5m 25 m 65 m 5m 5m Brisbane Melbourne Sydney Auckland not included in black box configuration total distance between scanner and processor must not exceed 65 m JMA-5200M k 2 s e r i e s ­ re a c h i n g a n ew l eve l o f f a s t a n d e f f i c i e nt p e r fo r m a n ce [. . . ]