User manual JUNO JGS1010

[. . . ] ANLEITUNG ZUM GEBRAUCH - INSTRUCTION BOOKLET DE GASHERDE GAS COOKERS JGS 1000 JGS 1010 JGS 3010 JGS 5010 JGS 5110 2 ENGLISH DISPOSAL OF PACKING HINTS ON THE DISPOSAL OF PACKING In case of not making use thereof we recommend to put: Except for wooden material, packing and auxiliary material of Juno Major Appliances are recyclable and on principle should be handed over to recycling stations. - After delivery to your premises packing of major appliances may be returned to our contract forwarders. Same will then initiate forwarding on for reuse or disposal. - paper, cardboard and corrugated board as well as - plastic packing material and - metal packing material into the collecting bins provided for this purpose. [. . . ] 10 OVEN DOOR REMOVAL The door can be removed for more efficient cleaning. Careless use of the oven will result in danger of hurts in the area of the door hinges!Unhooking of the oven door Fold the door down in horizontal position. Door catches on both sides to be clockwise turned by 30 degrees by means of a screwdriver. 11 FO 0417 Reinsertion of the oven door When re-installing the door lift the lower hinge frame and on both sides introduce into the openings provided at the cooker. 12 FO 0967 - 46 TOP LID REMOVAL AND REINSERTION For better cleaning the top lid can be removed. For removal fold up the lid and remove upward. For reinsertion of the lid introduce the pivot pins vertically into the pin guide. OVEN LAMP Prior to replacement the cooker must be separated from the mains by unscrewing the fuses or switching off the circuit-breaker!Unscrew the glass cover in anticlockwise direction and replace the bulb (socket E 14, 230V, 25 W, 300°C). Afterwards screw down the glass cover again. The replacement of the oven lamp is not covered by the guarantee. Fig. 13 FO 0418 REPLACEMENT OF COOKER COMPONENTS In case of damage the customer must replace only parts removable without the use of tools. The replacement of parts to be removed with tools must exclusively be carried out by an approved electrician or gas fitter resp. q The control knobs for open burners and oven can be drawn off to the front. q Spareparts can be ordered with the after-salesservice under indication of ordering number and model name of the appliance q Trouble In case of trouble with the gas section or when smelling gas resp. do at once: - close the gas tap of the gas feed or direct at the bottle resp. !- extinguish the gas burners or all flames resp. , and cigarettes!- do not switch on any electrical appliance!14 FO 0424 47 MONTAGEANWEISUNG IMPORTANT HINTS q The connection of the gas cooker must exclusively be carried out by an approved gas fitter. This must happen under adherence to DVGW/ÖVGW regulations, technical rules, guidelines of federal building regulations, guidelines and regulations of gas supply boards as well as to the following standards: - DVGW, worksheet G600 (DVGW-TRG, 1986) - Technical rules for gas installation - TRF 1988 - Technical rules for LPG q Prior to installation one must check whether the indications on the typeplate are in conformity with the local gas conditions. q The gas connection must be accessible and provided with a shutoff device. q Prior to any action stop the feed of gas to the cooker q The minimum distance between gas cooker and cooker hood must correspond to the instructions given by the manufacturer of the hood. [. . . ] Do not cover the waste air opening by pots, pot cloth, etc. Not possible, adequacy will not be impaired. Knob to be pushed longer Knob to be pushed strongly prior to release. Slightly increase the roasting temperature. [. . . ]