User manual JURA IMPRESSA E25

[. . . ] IMPRESSA E10/20/25 Instructions for use Art. 64598 9/04 JURA IMPRESSA E10/20/25 English. 5 ­ 21 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. [. . . ] At the start of the water draw-off operation there can be splashing Avoid direct contact with the skin!lights up Place a cup under the replaceable hot water jet (14). Open the steam / hot water draw-off tap (Fig. If the required water quantity is reached, close the steam / hot water draw-off tap (12). Drawing off steam Install the replaceable steam/frothing jet (Fig. Do not replace the replaceable steam/hot water jet (13) directly after drawing off steam, because the jet is hot after the draw-off operation. Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the replaceable steam/frothing jet (13) is pushed upwards when liquids are heated. Push down the frothing aid to froth liquids. During frothing some water will escape the system before the actual frothing process. At the start of the steam draw-off operation there can be splashing The steam jet becomes hot. lights up Place a cup under the steam/frothing jet (13) and immerse it in the milk to be frothed or the liquid to be heated. To draw off steam, open the steam/hot water draw-off tap (Fig. flashes When the steam quantity is reached, close the steam / hot water draw-off tap (12). lights up 13. 1 Attaching the Professional Cappuccino Frother or the Easy Cappuccino Frother to the IMPRESSA E10/20/25 Remove either the replaceable hot water jet (Fig. 5) or the replaceable steam / frothing jet (Fig. Now attach the Professional Cappuccino Frother or the Easy Cappuccino Frother (Fig. Connect the milk tube with the Auto Cappuccino or the Easy Cappuccino. The separate milk container (optional) is ideally suited for drawing in the milk. This is how you connect it to your IMPRESSA E10/20/25 (Fig. 8). 13. 2 Making cappuccino and hot milk with the Professional Cappuccino Frother A little hot water may drip from the jet before you start drawing off milk. For cappuccino, turn the selector switch (1) (Fig. For hot milk, turn the selector switch (1) (Fig. 8) or dip the milk tube directly into the milk. [. . . ] Disposal Please return the IMPRESSA E10/20/25 machine to your local dealer, the service shop or to JURA for proper disposal. 17 20. Tips for perfect coffee Height-adjustable coffee spout (15) You can adjust the height of the coffee spout to the size of your cups (Fig. 3) Grinding degree Refer to Chapter 2. 5 «Adjusting the grinding gear». Preheating cups You can preheat the cups using hot water or steam. [. . . ]