User manual JURA IMPRESSA E30

[. . . ] IMPRESSA E30 Instructions for use Art. 62515 03/01 The Impressa E30 is identical in construction and engineering with the Impressa E50/E55 mentioned in the operating instructions. Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. jura. com Kundendienst Telefon 062 389 82 33 Fig. 9 2 1 Instructions for use Jura Impressa E50/E55 1. Water volume selector switch Selector button for pre-ground coffee powder Coffee button 2 cups Rinsing button Coffee button 1 cup ON/OFF switch Display with warning lamps Water tank with carrying handle Height-adjustable coffee-spout Filler funnel for pre-ground coffee Cover for bean container Selector switch for coffee or hot-water/steam Pivoting nozzle for hot-water/steam Frothing nozzle Container for coffee grounds Drip tray cover Drip tray 9 8 7 6 5 4 3 2 1 10 11 12 13 14 15 16 17 Contents Jura Impressa E50/E55 1. [. . . ] Tip: You can also change the water volume while coffee is being drawn off. Simply turn the selector switch (1) to give more or less water. Note: If you press button the machine automatically doubles the amount of water and divides it between two cups. 9 7. Drawing off espresso/normal coffee Switch on the machine by pressing button. The machine is ready as soon as the warning lamp lights up. of frothing milk) is not influenced. 7. 2 Drawing off espresso/extra-strong coffee Place 1 cup under coffee-spout (9). Press the required button until warning lamps, , flash. Note: You can only draw off 1 cup of extra-strong coffee at a time. 7. 3 Using pre-ground powder coffee Press button. Warning lamps and light up. Now put 1 or 2 level measuring spoons of pre-ground coffee (Fig. 4) into the powder funnel (10). 10 Important: When steam is first drawn off, there is a possibility of spattering. Avoid direct contact with the skin. 11. Care and maintenance 11. 1 Fill water When warning lamp lights up no more coffee can be drawn off. Top up water as described in chapter 3. 3. 8. 1 Resetting to stand-by status Place a container under the pivoting nozzle (13). Turn selector switch for hot-water/steam (12) to position . Push button and draw off water until water-flow is automatically stopped. Then turn back selector switch for hot-water/steam (12) to position . Tip: Whenever you have finished drawing off steam clean the pivoting nozzle with a damp cloth. 11. 2 Empty grounds container Coffee grounds are collected in the grounds container. When warning lamp lights up, all coffee buttons are blocked and you must empty the grounds container. Do this carefully as there is water in it. First replace grounds container and then drip tray (Fig. Important: Whenever grounds container is emptied, empty drip tray too. 9. Drawing off hot-water Place a cup under the pivoting nozzle (13) and turn selector switch for hot-water/steam (12) to the symbol . To stop this process turn back selector switch for hot-water/ steam (12) to the sympol . [. . . ] Warning lamp flashes and warning lamps , light up. Empty drip tray (if necessary) and replace it. Warning lamps , , , flash and warning lamp lights up. Turn selector switch for hot-water/steam (12) back to position . [. . . ]