User manual JURA IMPRESSA J9 QUICK GUIDE

[. . . ] g T Turn the Rotary Switch until FILTER NO is displayed. k T Press the Rotary Switch to enter the programme item. FILTER NO g T Turn the Rotary Switch until FILTER YES is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display. 2 IMPRESSA J9 ­ Quick Reference Guide INSERT FILTER / PRESS RINSE, the Maintenance button c lights up. [. . . ] Your IMPRESSA will not prompt you to clean the cappuccino frother. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E JURA Cappuccino Cleaner is available from stockists. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item. CLEAN CAPPUCCINO k T Press the Rotary Switch. CLEANER FOR CAPPU. 5 IMPRESSA J9 ­ Quick Reference Guide T Pour 250 ml of fresh water into a receptacle and add one capful (max. T Immerse the milk pipe in the receptacle. E If you are using the Professional Cappuccino Frother, turn the selector switch to the Milk Foam p or Milk t position. T Place another receptacle under the cappuccino frother. CAPPUCCINOCLEANS, the cappuccino frother and the pipe are cleaned. c WATER FOR CAPPUCCINO T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the cappuccino frother again. CAPPUCCINO CLEANS, the cappuccino frother and the pipe are rinsed with fresh water. COFFEE READY appears on the display. c Dismantling and rinsing the Professional Cappuccino Frother T Carefully remove the cappuccino frother from the Connector System© by twisting slightly. T Dismantle the cappuccino frother into its individual parts. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the frother to the Connector System©. 6 IMPRESSA J9 ­ Quick Reference Guide Dismantling and rinsing the Easy Cappuccino Frother T Carefully remove the cappuccino frother from the Connector System© by twisting slightly. T Dismantle the cappuccino frother into its individual parts. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the frother to the Connector System©. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E The cleaning programme lasts approximately 20 minutes. E Do not interrupt the cleaning programme. [. . . ] T Remove the cappuccino frother from the Connector System©. 9 IMPRESSA J9 ­ Quick Reference Guide c T Place a receptacle (at least 500 ml) under the Connector System©. T Press the Maintenance button. DECALCS This causes water to flow out of the Connector System© several times. The Maintenance button c flashes during the descaling operation. The operation stops automatically, EMPTY TRAY. [. . . ]