User manual JURA IMPRESSA J9.3

[. . . ] IMPRESSA J9. 3 One Touch TFT Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects. Table of contents Your IMPRESSA J9. 3 One Touch TFT Control elements 4 Important information 6 Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 Preparing and using for the first time 9 JURA on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting up the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] `Latte macchiato' T Press the P button to exit programming mode. `Please select product:' Maintenance settings In the programme item `Maintenance settings (3/6)' you can make the following settings: `Filter' U Activate the CLARIS Blue filter cartridge (see Chapter 1 `Preparing and using for the first time ­ Inserting and activating the filter'). `Water hardness' U If you do not have a filter cartridge, you will need to set the water hardness (see Chapter 1 `Preparing and using for the first time ­ Adjusting the water hardness'). `Rinse the coffee system' / `Manual' U The switch-on rinse must be started manually. `Rinse the coffee system' / `Automatic' U The switch-on rinse is started automatically. `Rinse the milk system' / `After 10 min. ' U You are prompted to rinse the milk system 10 minutes after preparation of a speciality coffee with milk. `Rinse the milk system' / `Immediate' U You are prompted to rinse the milk system immediately after preparation of a speciality coffee with milk. U U U U U U 25 4 Permanent settings in programming mode Example: Proceed as follows to make the machine prompt you to rinse the milk system immediately after preparing a speciality coffee with milk. Precondition: `Please select product:' is displayed. `Maintenance status (1/6)' g T Turn the Rotary Switch until the programme item `Maintenance settings (3/6)' is displayed. T Press the `Rinse the milk system' button. `Rinse the milk system' T Press the `Immediate' button. `Saved' appears briefly on the display. `Maintenance settings (3/6)' O T Press the P button to exit programming mode. `Please select product:' Energy-saving mode In the programme item `Machine settings 1 (4/6)' / `Save energy' you can permanently set an energy-saving mode (Energy Save Mode, E. S. M. ©): `Inactive' U All speciality coffees, speciality coffees with milk and hot water can be prepared without having to wait. U Before milk preparation, the machine heats up. `Active' (Energy saving of up to 40%) U Soon after the last preparation, the IMPRESSA stops heating up. As soon as the energy-saving temperature is reached, this is indicated in the display by the message `Save energy' ­ this may take several minutes. U The machine heats up before coffee, hot water or milk preparation. U U Example: Proceed as follows to change the energy-saving mode from `Inactive' to `Active'. Precondition: `Please select product:' is displayed. `Maintenance status (1/6)' 26 4 Permanent settings in programming mode g T Turn the Rotary Switch until the programme item `Machine settings 1 (4/6)' is displayed. `Save energy' T Press the `Active' button. `Saved' appears briefly on the display. [. . . ] `ERROR 2' is displayed. There are foreign objects in the grinder. If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons. ­ Other `ERROR' messages are displayed. T Switch the IMPRESSA off at the power switch. Contact customer support in your country (see Chapter 11 `JURA contact details / Legal information'). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 `JURA contact details / Legal information'). 43 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal In order to protect the IMPRESSA from frost during transport, the system must be emptied. [. . . ]