User manual JURA IMPRESSA S50

[. . . ] IMPRESSA S50/4000/401 Instructions for use Art. 62088 / 0019669 5/03 Jura Impressa S50/4000/401 English . 6 ­ 20 = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. juraworld. com Fig. 8 11 12 13 14 15 10 9 8 7 6 5 4 3 C 16 17 18 19 20 A B 2 1 1. 2 Operating elements, Jura Impressa S50/4000/401 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 A B C Drip tray/residual water container Drip tray cover Cover for special functions Rotary button, water quantity Coffee key, 2 cups Coffee key, 1 cup Selector key for pre-ground coffee powder ON/OFF switch Rinsing key Display Water tank with carrying handle Cover for bean container with aroma protection lid Cover for pre-ground coffee filler funnel Height-adjustable coffee spout Cup tray Selector key for steam Selector key for coffee or hot water/steam Pivoting nozzle for hot water/steam Frothing nozzle Container for coffee grounds Cleaning key Descaling key Rotary key, powder quantity Table off contents Jura Impressa S50/4000/401 1. [. . . ] If a lot of steam is drawn off, the drip tray (1) must be emptied more often. 10. Drawing off steam The steam can be used to heat liquids and also to froth up milk for cappuccino. Please ensure that the frothing nozzle (19) is pushed upwards when heating liquids. When frothing liquids, push the frothing nozzle downwards (Fig. Place a cup under the pivoting nozzle for hot water/steam (18). As soon as the control lamp lights up, you can draw off steam. Immerse the frothing nozzle (19) into the milk to be frothed or the liquid to be heated. Turn the selector key coffee or hot water/steam (17) to the position . To end the draw-off of steam, put the selector key coffee or hot water/steam (17) back to position . If you would like to draw off a coffee immediately after the steam, proceed as described under point 10. 1. The maximum draw-off period is about 8 minutes. Due to the system set-up, some water can come out and can be let off before the actual drawing-off of steam. in the frothing of milk, is not influenced in any way. 11. Drawing off hot water Place a cup under the pivoting nozzle for hot water/steam (18) and turn the selector key for coffee or hot water/steam (17) to the symbol . In order to end the procedure, turn the selector key for coffee or hot water/steam (17) back to the symbol . When water is drawn off, there can be spattering at the beginning. The pivoting nozzle for hot water/steam (18) becomes hot. Avoid direct contact with the skin. 12. Switching off the machine When the machine is switched off, the rinsing programme is automatically run again. Therefore, place an empty vessel under the height-adjustable coffee spout (14) and push the ON/OFF switch. After the rinsing water has run into the cup, the machine switches off. Pour the rinsing water down the drain. 12 13. [. . . ] Place a vessel under the height-adjustable coffee spout (14) and press the key . 16. Disposal For correct disposal, you should return your coffee machine to your dealer, Jura service centre or the firm of Jura. 17. Tips for perfect coffee Height-adjustable coffee spout You can adjust the height of the coffee-spout to the size of your cups (Fig. Grinding Please refer to point 3. 5 Pre-warm cups You can warm the cups in advance with hot water or steam. [. . . ]