User manual JURA IMPRESSA S9

[. . . ] IMPRESSA S90/S95/S9 IMPRESSA 701/601 Instructions for use Art. 63720 5/04 Jura Impressa S90/S95/S9 ­ 701/601 English . 6 ­ 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. [. . . ] Place a cup under the Professional-Cappuccino Frother. STEAM PORTION The frothing/heating time depends on the steam portion settings you have programmed. (See "Programming steam portion" Chapter 13. 4) 11. 2 Constant frothing up of milk S90/S95/601 Pour milk into a milk container and immerse the intake-tube in the milk. 12 For cappuccino turn the selector switch (1) (Fig. 10) to area (2) For hot milk turn the selector switch (1) (Fig. 10) to area (3) Now place the cup with the cappuccino froth or the hot milk under the coffee spout and draw of the product of your choice. 11. 5 Cleaning the Professional-Cappuccino Frother The Professional-Cappuccino Frother must be cleaned after each draw-off operation. Fill water in a container and immerse the hose in it. Draw off steam until the water/steam mixture is clean. If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte and thoroughly rinse the flow regulation with water (Fig. For proper cleaning, use the Jura Auto Cappuccino Cleaning Agent which is available at your authorized dealer. The following settings can be programmed: Powder quantity Coffee temperature Water quantity Steam portion Tea portion Filter Water hardness Economy mode Timer clock Automatic switch on time Automatic switch off time Supplies and cup counter Language selection 13. 1 Programming powder quantity Switch the machine on by pressing ON/OFF key . Press key P until you can hear an acoustic signal. POWDER QUANTITY / SELECT KEY Now press the key that you want to programme. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished. POWDER - ·········· II ·········· + The powder quantity can be selected by pressing keys + or briefly. To store the new powder quantity in memory briefly press key P . By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. 12. Switching off machine When the machine is switched off, the rinsing program is automatically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Programming Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be programmed individually. The programming keys are located behind the front cover (3). 13 13. 2 Programming coffee temperature TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key + or - . [. . . ] Grinding Please refer to chapter 3. 4 "Adjusting grinder". Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is lost by stirring the contents of the cup. [. . . ]