User manual JURA IMPRESSA X7

[. . . ] IMPRESSA X7 Instructions for use Art. 62565 ­ 10/04 Nur für UL-geprüfte Geräte gültig ­ Valable seulement pour certificées machines UL ­ Valide solo per apparecchi sottoposti a controlli UL ­ Only valid for UL-approved machines / Sólo válido para aparatos clasificados como UL ­ Alleen voor UL-gekeurde apparaten geldig. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/ or injury to persons, including the following: Read all instructions. To protect against fire, electric shock and personal injury do not immerse cord, plugs, or appliance in water or other liquid. Close supervision is necessary when any appliance is used by or near children. [. . . ] For more information on the CLARIS plus filter cartridge refer to the brochure "CLARIS plus. Gentle on your coffee machine. " 8 11. Drawing off hot water : SELECT PRODUCT Place a cup under the pivoting nozzle (18) and press the drawoff key . : PORTION HOT WATER The draw-off of the programme portion of hot water stops automatically. You can interrupt the draw-off prematurely at any time by pressing the draw-off key again. When water is drawn off, there can be splattering at the beginning. Avoid direct contact with the skin. 15. 1 Programming grinding amount Switch your machine on the with ON/OFF operating switch. : ADJUST COFFEE QUANTITY / SELECT PRODUCT Press the required draw-off key. : (selected product) ­ . . . . . . . . . . . . . . II. . . . . . . . . . . . . . + By pressing the key + or - you can determine the amount to be ground. : (selected product) : 100% : 0% You can determine the allocation of the grinder "left" or "right". By pressing the key + or - you can change the values. : ADJUST COFFEE QUANTITY / SELECT PRODUCT Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming. 12. Drawing off steam : SELECT PRODUCT Place a cup with the liquid to be heated under the pivoting nozzle (18) and press the draw-off key . : STEAM ACTIVE To end the draw-off of steam, press the key . When steam is drawn off, there can be splattering at the beginning. Avoid direct contact with the skin. E 15. 2 Programming Temperature : ADJUST TEMPERATURE / SELECT PRODUCT Press the required draw-off key. Select the required temperature with the keys + or - (high or standart) To store, press the key PROG. : ADJUST TEMPERATURE / SELECT PRODUCT Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming. 13. Drawing-off milk froth : SELECT PRODUCT Pour milk / Tetra Pak into a jug and immerse the cappuccino tube into the milk. Place 1 cup under the coffee spout (4) and press the draw-off key . The programme amount is prepared and stops automatically. [. . . ] : PRESS DESCALING : UNIT DECALCIFYING / PLEASE WAIT An acoustic signal is heard : EMPTY DRIP TRAY / CLEAN CONTACTS (Chapter 16. 4). 21. Disposal For correct disposal, you should return your coffee machine to your dealer, JURA service centre or the firm of JURA. 12 24. Messages Cause FILL WATER TANK Action The tank is empty The water level display in the tank has jammed The tank is scaled; the water level display is jammed FILL COFFEE BEANS The bean container is empty Although beans have been filled, the display does not go off A foreign body has got jammed EMPTY DRAWER The grounds container is full The display appears after only a few cups Top up with water Empty tank, rinse out and replace when it has been filled Remove the tank, de-scale it, rinse well, fill and put in again Fill up with beans Draw off a cup of coffee. "FILL BEANS" only goes off after a draw-off Remove the foreign body as described in Section 16. 8 "Removing foreign objects" Remove the tray, empty the grounds container, replace the tray Leave the machine switched on while the grounds container is emptied. [. . . ]