User manual JURA IMPRESSA X70

[. . . ] IMPRESSA S70 IMPRESSA X70 Instructions for use Art. 61957 01/03 Jura Impressa S70/ X70 English . 6 ­ 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. [. . . ] The cup should only be removed when the hot water has stopped its flow. 11 When steam is first drawn off, there is a possibility of spattering. Avoid direct contact with the skin. 11. Switching off machine When the machine is switched off, the rinsing program is automatically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Programming Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be programmed individually. The programming keys are located behind the front cover (3). The following settings can be programmed: Powder quantity Brewing temperature Water quantity Filter Water hardness Economy mode Timer clock Automatic switch on time Automatic switch off time Supplies and cup counter Language selection POWDER QUANTITY / SELECT KEY Now press the key that you want to programme. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished. POWDER ­ ··········II·········· + The powder quantity can be selected by pressing keys + or briefly. To store the new powder quantity in memory briefly press key P . You can go to the next setting by pressing key + . 12. 2 Programming coffee temperature TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key + or - . To store the new coffee temperature in memory briefly press key P . TEMPERATURE COFFEE / SELECT KEY You can call up the next setting by pressing key + . 12. 3 Programming water quantity WATER QUANTITY / SELECT KEY Put a cup under the coffee-spout (15) and then press the key that you want to programme. The selected value is confirmed Now your machine prepares a coffee. P ­ ··········II·········· + 12. 1 Programming POWDER QUANTITY Switch the machine on by pressing ON/OFF key . P until you can hear an acoustic signal. Press key 12 When the required water quantity is reached press key P . You can call up the next setting by pressing key + . There is an additional possibility to alter the water quantity anew. [. . . ] The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. 18 18. Messages Cause FILL WATER Water tank is empty Water level indicator in tank is jammed Tank is calcified, water level indicator is stuck Action Top up with water Empty tank, rinse out, fill up and replace Remove tank, decalcify, rinse well, fill up with water and replace Top up with beans Draw off cup of coffee. [. . . ]