User manual JURA IMPRESSA X90

[. . . ] IMPRESSA X90/X95 Instructions for use Art. 63721 3/03 Jura Impressa X90/X95 English . 6 ­ 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. [. . . ] The optionally available milk container can be used for sucking in milk. 11). 11. 2 Cleaning the Profi-Auto-Cappuccino/ Caffè Latte The Profi-Auto-Cappuccino/Caffè Latte (21) must be cleaned after each draw-off operation. Fill water in a container and immerse the hose in it. Draw off steam until the water/steam mixture is clean. If necessary, disassemble the Profi-Auto-Cappuccino/Caffè Latte and thoroughly rinse the flow regulation with water (Fig. For proper cleaning, use the Jura Auto Cappuccino Cleaning Agent which is available at your authorized dealer. 11. 1 Drawing off cappuccino and hot milk with Profi-Auto-Cappuccino/Caffè Latte Fill the milk container with milk or immerse the hose in the milk directly. Place a cup under the Profi Auto Cappuccino/Caffè Latte (21). Press the steam portion draw off key STEAM PORTION The frothing/heating time depends on the steam portion settings you have programmed. (See "Programming steam portion" Chapter 13. 4) 12. Switching off machine When the machine is switched off, the rinsing program is automatically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Programming Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be programmed individually. The programming keys are located behind the front cover (3). The following settings can be programmed: Powder quantity Coffee temperature Water quantity Steam portion Tea portion Filter Water hardness Economy mode Timer clock Automatic switch on time Automatic switch off time Supplies and cup counter Language selection To store the new powder quantity in memory briefly press key P . By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. 13. 2 Programming coffee temperature TEMPERATURE COFFEE / SELECT KEY Now press the key that you want to programme. Select the required temperature (high or normal) by activating key + or - . To store the new coffee temperature in memory briefly press key P. TEMPERATURE COFFEE / SELECT KEY By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. 13. 3 Programming water quantity WATER QUANTITY / SELECT KEY Put a cup under the coffee-spout (15) and then press the key that you want to programme. The selected value is confirmed Now your machine prepares a coffee. P - ·········· II ·········· + When the required water quantity is reached press key P . [. . . ] Tips for a perfect coffee Height adjustable coffee-spout You can adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 3. 4 "Adjusting grinder". Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. [. . . ]