User manual JURA NESPRESSO N9 NESPRESSO N90

[. . . ] 63771 1/05 JURA N90/N9 English . 5 ­ 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. jura. com = Note = Important = Tip Fig. [. . . ] Now draw off hot milk by turning the hot water / steam valve to Hot Water / Steam (Fig. 4). 11 12. 2 Drawing off cappuccino using the Professional Cappuccino Frother To draw off frothed milk, you must activate the steam draw-off mode first (see Chapter 10 "Drawing off steam". ) Turn the selector valve (1) (Fig. 8) to area (2) to draw off frothed milk. Now draw off frothed milk by turning the hot water / steam valve to Hot Water / Steam (Fig. To draw off coffee again, you must activate Coffee Ready mode first (see Chapter 11 "Returning to Coffee Ready") Turn the selector switch (1) (Fig. 8) in horizontal position. RINSE ­ PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY Press the draw-off key of the product to be programmed (SMALLCUP or LARGECUP) until the following message is displayed: ENOUGH / COFFEE?As soon as the required quantity of coffee is drawn off, press the draw-off key again. READY 12. 3 Cleaning the Professional Cappuccino Frother Remove the Professional Cappuccino Frother. If you do not achieve optimum results, disassemble the flow controller and the selector lever (Fig. Thoroughly rinse these parts with water As soon as you have frothed enough milk, it is important to clean the Professional Cappuccino Frother. Fill water in a jug and immerse the intake-tube in the water. Now draw off steam until the water/steam mixture flowing into your cup is completely clean. Your Professional Cappuccino Frother is clean again. 15. Programming You can programme the following stages: ¼ Filter ¼ Water hardness ¼ Steam portion ¼ Water portion ¼ Time ¼ Draw offs ¼ No. of de-scaling operations ¼ Language 13. Switching off machine READY Use the ON/OFF key to switch off the machine. 15. 1 Programming the filter Refer to Chapter 6 "Installing the Claris plus filter cartridge". 14. Adjusting the water quantity for coffee Use the ON/OFF key to switch on the machine. MACHINE HEATING 12 15. 2 Programming the water hardness Refer to Chapter 5 «Adjusting the water hardness». 15. 3 Programming the steam portion Use the ON/OFF key to switch on the machine. MACHINE HEATING RINSE ­ PRESS DRAW-OFF KEY Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP). RINSING READY Press the programming key until the machine switches over to programming mode. FILTER Press the arrow keys a number of times until the following message appears: STEAM Press the programming key to activate the programming step. [. . . ] TRAY / EMPTY Take out tray, empty it and reinstall it. READY The machine will be switched off automatically after a few seconds. After the de-scaling, clean the aluminium front using a slightly moist cloth. 18 18. Disposal Please return the machine to your local dealer, the service shop or to JURA for proper disposal. 19. [. . . ]