User manual JURA SUBITO

[. . . ] SUBITO Operating instructions Automatic 2-cup espresso/coffee machine = Note = Important 1 2 3 1. 1. 10 11 12 Operating elements 6 5 4 3 8 9 10 11 12 13 14 2 1 1. Warning lamp `Empty grounds container' 12. Selector switch for coffee, water or steam 14. [. . . ] Ensure that for heating the movable tube of the nozzle is pushed up. Hygienic reasons make it advisable to empty the container once a day. Move the adjustable coffee spout to its uppermost position to avoid damaging the spout when removing the residual water container. Take the residual water container out of the machine (Fig. Be careful as there is water in the container. Remove the grounds container and dispose of the grounds. Clean and replace the grounds and water containers. The red warning lamp ( ) goes out. Release the crank handle and lower it so that the brewing plunger, brewing sieve and gaskets can be cleaned as well. can be cleaned as well. Clean the top of the machine with a brush or a damp cloth (Fig. Release the crank handle and pull it up. Reposition the cover on the machine precisely as illustrated (Fig. 12) until it clicks into its correct position. Replace the filler funnel and rotate the cover back to the `Fill coffee' position (Fig. 6). 9. 2 Emptying the residual water container As soon as the residual water indicator (red float) appears above the drip tray cover, it is necessary to empty the residual water container. Move the adjustable coffee spout to its uppermost position to avoid damaging the spout when removing the residual water container. Take the residual water container out of the machine (Fig. Be careful as there is water in the container. Empty and clean the water container and replace it together with the grounds container. 9. 4 Cleaning the water tank If a build-up of calcium deposit becomes visible in the water tank, this can be descaled separately. To do this, it should be removed from the appliance. 9. 5 Cleaning water/steam nozzle If the water/steam nozzle becomes blocked, it can be unscrewed with the aid of a coin. Clean the spout thoroughly under warm running water. Screw the spout back in its correct position. 9. 3 Cleaning cover We recommend that you clean the cover 2 or 3 times a week and also if the machine is not going to be used for a longish period of time (vacation etc. ). You should follow the instructions below: Rotate the cover to the cleaning position (Fig. 8) and take out the removable filler funnel. [. . . ] Replacing the CLARIS plus filter cartridge Swing the cartridge retaining clip up and fit the filter cartridge into the water tank, exerting light pressure only. Swing the cartridge retaining clip back down, until it can be heard clicking into position. The cartridge retaining clip is equipped with a special rotating disc to allow the date to be set for changing the cartridge (2 months from date of fitting). Turn the tapping switch ( ) on and draw off approx. 1/2 of the contents of the tank through the water and steam spout. [. . . ]