User manual JVC AV-14F703 Instruction Manual

[. . . ] For model: AV-14F703 COLOR TELEVISION USER'S GUIDE TV CATV VCR DVD POWER STANDARD INPUT 1 BBE DISPLAY SLEEP TIMER 2 5 8 0 3 6 9 RETURN LIGHT 4 7 C. C. RM-C309G AUDIO SELECT MUTING ENTER CH VOL CH MENU VCR CHANNEL + PREV NEXT VOL EXIT VCR/DVD POWER TV/VCR REW REC OPEN/CLOSE PLAY STOP FF PAUSE STILL/PAUSE TV IMPORTANT NOTE TO THE CUSTOMER: In the space below, enter the serial number for your television (located on the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. Serial Number The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Attach the Combiner to the Antenna Jack. NOTE:If your VHF antenna has a Twin-lead Wire, use the 30075 ohm Matching Transformer (not supplied), then connect the Transformer to the Combiner. 300 ohm Twin-lead Wire Combiner (not supplied) 300-75 ohm Matching Transformer (not supplied) Incoming CATV For Subscribers to Basic Cable TV Service Converter/Descrambler Converter/Descrambler Splitter A/B Switch AB For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television. For Subscribers to Scrambled Cable TV Service If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the incoming cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels. Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Connect the 75 ohm cable from a combination VHF/UHF antenna to the Antenna Jack. If your combination antenna has a 300 ohm Twin-lead Wire, use the 300-75 ohm Matching Transformer (not supplied). Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-leads) Connect the UHF Twin-lead Wire to a Combiner (not supplied). Connect the VHF Twin-lead to the 300-75 ohm Matching Transformer (not supplied). Attach the Combiner to the Antenna Jack. For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a two-set signal splitter (sometimes called a "two-set coupler") and an A/B Switch box from the cable installer or an electronics supply store. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the "A" position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the box to tune scrambled channels. 11 CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the User's Guide provided with each component for the location of video and audio inputs and outputs. The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only. Press the INPUT button to select the AV mode to use the TV as a monitor. Operate your VCR as usual. TV/AV SELECTION If you connect the TV to VCR, camcorder, TV game or DVD you can select by pressing the INPUT button. Press the INPUT button repeatedly to select the desired mode. TV VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 1 COMPONENT An indication of input source will display on the screen for 4 seconds. 1. Use VIDEO 1 IN jacks to connect it. ) VIDEO AUDIO (L) Rear of TV IN Y VIDEO L/MONO AUDIO R VIDEO 3. To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the TV as shown. OUT VCR Front of TV VIDEO 3 IN PB PR VIDEO 2 L/MONO AUDIO R VIDEO VIDEO L/MONO AUDIO R VIDEO 1 To Audio(L/R)/ Video OUT (not supplied) AUDIO (R) To Audio(L/R)/ Video OUT AUDIO (L) AUDIO (R) (not supplied) Select "VIDEO 1" by pressing the INPUT button to display the VCR picture. Select "VIDEO 3" by pressing the INPUT button to display the camcorder picture. 2. To connect the TV to a VCR with an S-VIDEO jack If you connect a VCR with an S-video jack to the SVIDEO jack on the rear of TV, you must also connect the audio cables to the AUDIO IN (VIDEO 1) jacks on the rear of the TV. The S-video cable only carries the video signal. Audio signal is separate. Rear of TV IN Y ANT(75) VIDEO L/MONO VIDEO L/MONO AUDIO R 4. To connect the TV to a DVD with COMPONENT VIDEO OUT Jacks. If you connect a DVD with the COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN (Y, PB, PR) jacks on the rear of TV, you must also connect the audio cables to the AUDIO IN (VIDEO 2 IN) jacks on the rear of the TV. Rear of TV DVD AUDIO (L) IN Y VIDEO L/MONO AUDIO R VCR AUDIO (L) OUT OUT PB PR VIDEO 2 S-VIDEO AUDIO R VIDEO 1 VIDEO 2 VIDEO 1 S-VIDEO AUDIO (R) (Not supplied) (Not supplied) (Not supplied) AUDIO (R) (Not supplied) NOTE: When the S-video cable and the video cable are connected to each jack at the same time, the S-video cable takes precedence over the video cable. Select "COMPONENT" by pressing the INPUT button to display the DVD picture. If you have a DVD without COMPONENT VIDEO OUT jacks, connect the video cable to VIDEO IN (VIDEO 2 IN) jack. [. . . ] Station or CATV experiencing problems, tune to another station. Make sure channels are set into memory. Set TV/CATV menu option to the CATV mode. Station or CATV system problems, try another station. [. . . ]